Only 35th and 06 revups with test pipes respond
Originally Posted by 97supratt
Is the o2 sensor touching the non fouler? If it is then there is your problem. I suggest removing the o2 sensor and the non foulers. Tighten the o2 sensor onto the non foulers and look at the end of the non fouler. If you drilled the non fouler incorrectly, then your o2 sensor will have problems detecting the correct amount of gases.
Originally Posted by thawk408
Im not sure if mine is touching or not, I will check later. Why does it matter if they are touching?
If half of the sensor is blocked off the readings will be incorrect and throw a CEL.
Originally Posted by 97supratt
o2 sensors are very sensative, especially on the newer 04.5+ models (wideband sensors).
If half of the sensor is blocked off the readings will be incorrect and throw a CEL.
If half of the sensor is blocked off the readings will be incorrect and throw a CEL.
I was doing a little research, I came a cross this code scanner that says it's able to turn off the CEL.
http://www.amazon.com/Actron-CP9175-...8&s=automotive
Let me know what you think.
Matt
http://www.amazon.com/Actron-CP9175-...8&s=automotive
Let me know what you think.
Matt
Originally Posted by thawk408
Mine seemed to work for awhile, then all of sudden about half a year ago it came on when I was on a road trip. It has been on every since.
Originally Posted by ML2000
I was doing a little research, I came a cross this code scanner that says it's able to turn off the CEL.
http://www.amazon.com/Actron-CP9175-...8&s=automotive
Let me know what you think.
Matt
http://www.amazon.com/Actron-CP9175-...8&s=automotive
Let me know what you think.
Matt
Thread Starter
Registered User
iTrader: (13)
Joined: Jun 2006
Posts: 786
Likes: 0
From: Harrisburg, Pa
YEa I used the lock tight on mine and when I reset the cel comes back 5 miles or so later, didnt use it on my bros and his cel comes back about 20 miles or so later. Check the sensors non of them on either car are touching anything and nothing is blocking them. About this diagnostic tool, is it the aam cipher your refering too? And will it keep the cel off?
Originally Posted by jtgli
YEa I used the lock tight on mine and when I reset the cel comes back 5 miles or so later, didnt use it on my bros and his cel comes back about 20 miles or so later. Check the sensors non of them on either car are touching anything and nothing is blocking them. About this diagnostic tool, is it the aam cipher your refering too? And will it keep the cel off?
Originally Posted by 97supratt
If you're gonna do that, you might as well buy the Cipher diagnostic tool. You have more features, plus its very user friendly. Wired24/7 has one and it works great, i'm sure he'll chime in here real soon for some information.
Matt
Since 97supra said I would :P
Yeah I have nothing but good things to say about cipher.
It's a great tool for eliminating about 99% of the unknowns associated with your car. Great diagnostic tool for basically every possible problem you could have.
Check what CEL's mean and easily reset them. Turn up the idle, or advance timing a couple of degrees to unlock some power.... and lots more
Yeah I have nothing but good things to say about cipher.
It's a great tool for eliminating about 99% of the unknowns associated with your car. Great diagnostic tool for basically every possible problem you could have.
Check what CEL's mean and easily reset them. Turn up the idle, or advance timing a couple of degrees to unlock some power.... and lots more
Originally Posted by Wired 24/7
Since 97supra said I would :P
Yeah I have nothing but good things to say about cipher.
It's a great tool for eliminating about 99% of the unknowns associated with your car. Great diagnostic tool for basically every possible problem you could have.
Check what CEL's mean and easily reset them. Turn up the idle, or advance timing a couple of degrees to unlock some power.... and lots more
Yeah I have nothing but good things to say about cipher.
It's a great tool for eliminating about 99% of the unknowns associated with your car. Great diagnostic tool for basically every possible problem you could have.
Check what CEL's mean and easily reset them. Turn up the idle, or advance timing a couple of degrees to unlock some power.... and lots more
yea i love the idea of test pipes but hi flow cats are looking better and better. Just not wanting the rasp and cel issues. I dunno maybey i need to here a test piped car to hear and get a feel of what its like?
I have the HELP Spark Plug Defoulers and I do not have a CEL. Originally I thought I did get a CEL but it turned out to be for the throttle positioning sensor. Anyone actually used a scanner? Or just assumed it was the tps?
Originally Posted by 9kFever
I have the HELP Spark Plug Defoulers and I do not have a CEL. Originally I thought I did get a CEL but it turned out to be for the throttle positioning sensor. Anyone actually used a scanner? Or just assumed it was the tps?
Thread
Thread Starter
Forum
Replies
Last Post




