Hey all i just purchased a motordyne 5/16th spacer and some kinetix test pipes off a member on the forum, and i was wondering if anyone could give me a link to a walk through on how to install both or either. Just any help would be great. I looked but couldnt find and real installing tutorials, just like a test pipe non fouler thing and some people needing help w/ cooling valves for the spacers.


Thanks,
Dan

 

The instructions to install the spacer are on Motordyne's website...

To install test pipes are fairly straight forward. All you have to do is remove the O2 sensors, the cats, the brace, and then install the test pipes and O2 sensors.

You will have to use ramps/jack stands/lift to install the test pipes though. You will have to remove bolts through the engine bay AND underneath the car. I know its lacking detail but its really a straight forward install...

 

Ya i was just hoping to see maybe some pics (im VERYYY visual) on where the bolts are and what not. I have not installed anything on my car before except for a radio and sub lol but i mean nothing engine wise. If anyone has some pics or maybe a detailed walk-through that would be great.

 

Anyone else think they can help with this?

 

Oh cmon! Anyone? Someone please show some assistance :-D

 

Good luck. I wouldn't mind learning myself...

 

up. Some help plz.

 

Well thats the thing. Its nearly impossible to get pics on the test pipe installation because there isn't much room. If you take off your intake tubing and look down towards the cats you will see 3 bolts that holds the cats and exhaust manifold together, same goes for the passenger side. There are two bolts on the end where the cats connects to the y-pipe and you'll see where the brace connects to the frame. Trust me, pictures aren't really going to help you like you think it will.

The Motordyne instructions are really detailed and provides pictures.

 

Iight thanks, ya i see what yall mean now w/ the test pipes.