When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm new to Zs and have always been use to the regular K&N intake filters and piping. I was mind blown to see the JWT filters size. Just wanted to post a picture to show people who may not have the filter or looking to buy this. Compared to a can of RC it's a monster!
Mine is bigger lol, just had to, BTW I really recommend this company, they are local to us and their filters do a much better job than the K&N does. The filter in my hand is a replacement for the pop charger.
Last edited by DarkZ03; 04-09-2015 at 10:55 PM.
Reason: info
Mine is bigger lol, just had to, BTW I really recommend this company, they are local to us and their filters do a much better job than the K&N does. The filter in my hand is a replacement for the pop charger.
How much longer is it than the pop charger? Can you still hear the sound from the air when you rev?
I think it is about 1.5-3.0" I actually have both but have never measured them, I have used this filter twice in a Stillen box. It is not as loud as the other filters because it actually filters better, I would say it is just slightly lower and maybe a lower pitch in sound as well.
R2C said that the filter still flows the same and that is why they made it bigger. They are reusable you just have to blow them out from the inside using compressed air, more importantly its a dry filter so no MAF issues.
Mine is bigger lol, just had to, BTW I really recommend this company, they are local to us and their filters do a much better job than the K&N does. The filter in my hand is a replacement for the pop charger.
Did no one mention Agency Power? Look it up. One of the best sounding exhausts I've ever heard, I did a lot of extensive research and I decided to pick one up, I have 0 regrets.
Sound is slightly lower/deeper than the pop charger, not as loud I think, but I have only replaced the Stillen which is similar but no top feed. Power I'm going to say there is no difference from the pop charger filter, I got this because I want the sound of a intake but not the terrible filtering capabilities of an oiled filter. The company also sells 2 intakes but I have never bothered getting them as they are expensive and we all know there is not a lot to be gained with intakes on these cars.
I like the pop charger because of it's largre ram air cone, which is great for a short ram set up because it catches inlet air a lot better. The aluminum heat shield is a nice addition too to significantly reduce the potential of sucking in heat radiated from the motor. Get the popcharger with the aluminum "Z Tube" Intake pipe on z1motorsports.com. It gives you less restriction compared to the oem intake pipe and also looks bad *** with it! I went with the chrome pipe w/ blue z1 couplers
Not to get into a debate of which intake is better, but I've never used the pop charger and never will. What I can tell you is that my previous car which had either a stock intake or Stillen with R2C filter would sh*t on cars that had more mods than mine (pop charger included) this was on the dyno. My car had 5-10 whp more than the closest DE which had 2-3 more power mods than I did.
I was looking online for exhausts and I came across the Topspeed n1 style exhaust. I love the sound from the videos that I have seen. But then I came across this that look like the motordyne exhaust. Does any one have any input on this one?http://m.ebay.com/itm/231436586876?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%253A80%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D53601919689_324272%2526itemid%253D231436586876%2526targetid%253D87946137369%2526rpc%253D0.13%2526rpc_upld_id%253D47802%2526rlsatarget%253D%2526device%253Dm%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fitm%25252Flike%25252F231436586876%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526gclid%253DCjwKEAjwvPepBRCoqo37teOD1XsSJAC7v6WQEr5Ej5i3SWQfNKRMAsLLOR0LaTfXVXDJoxrAm_03iBoC-ZDw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D821814015644&ul_ref=http%3A%2F%2Frover.ebay.com%3A80%2Frover%2F1%2F711-117182-37290-0%2F2%3Fmtid%3D1588%26kwid%3D1%26crlp%3D53601919689_324272%26itemid%3D231436586876%26targetid%3D87946137369%26rpc%3D0.13%26rpc_upld_id%3D47802%26rlsatarget%3D%26device%3Dm%26mpre%3Dhttp%253A%252F%252Fwww.ebay.com%252Fitm%252Flike%252F231436586876%253Flpid%253D82%2526chn%253Dps%26adtype%3Dpla%26gclid%3DCjwKEAjwvPepBRCoqo37teOD1XsSJAC7v6WQEr5Ej5i3SWQfNKRMAsLLOR0LaTfXVXDJoxrAm_03iBoC-ZDw_wcB%26srcrot%3D711-117182-37290-0%26rvr_id%3D821814015644&_mwBanner=1
Last edited by Rickyg; 04-28-2015 at 04:56 AM.
Reason: Link not working
I have it I like it. Quiet when crusing around town but opens up at higher rpm.
Originally Posted by Rickyg
I was looking online for exhausts and I came across the Topspeed n1 style exhaust. I love the sound from the videos that I have seen. But then I came across this that look like the motordyne exhaust. Does any one have any input on this one?http://m.ebay.com/itm/231436586876?l...44&_mwBanner=1
I had a bad experience with DC sport headers back in 07, I had to get them rewelded and grinded because the pipe/bracket wasnt flush and had a crappy weld on it. I am looking at Borla headers, Has anyone had trouble with installation? I wont get PPE because I read people have had trouble having them fit. Also I cant find any vendors that supply crawford headers or I would have gotten those.
(IDC about hp/sound, looking for aftermarket reliability)
Bought my car like this not too long ago the stock exhaust was cut about 2 feet from rear bumper. It sounds pretty good now but I want a muffler & the exhausts tips. What is the cheapest thing I could do? I'm in college & really on a budget..
Hey everyone. I've had an account for awhile but never post. Anyways, I'm looking to get some good sound for my Z, I don't really care about performance. Something that sounds nice, deep and raspy while idling and kind of loud when accelerating. A buddy of mine said a muffler and tips will be fine. Any recommendations on what to get? Not trying to spend too much money, but will invest in quality. Thanks for the help!!
hey all, after my wedding i was looking to buy an hr z to go along with the de my wife already has (currently in kouki s14) has anyone in here used any exhaust system by blitz? ive tried google but havent found any real solid reviews. so any information would be appreciated
04-09-2015, 06:59 PM
Can compared to Pop Charger
BTW I really recommend this company, they are local to us and their filters do a much better job than the K&N does. The filter in my hand is a replacement for the pop charger.
