Couple questions..

Can I use a K&N Recharge Kit?

Also, I have teh Poopcharger, 5/8 spacer, and Invidia N1 catback (stock Ypipe) on a 5AT 2004 Non Rev up. What else should I do outside of test pipes and how much horsepower do you think the combo above added?

Thanks!

 

get resonated test pipes so you dont sound like a ricer and get your car custom tuned to those mods. my buddy had exhaust and intake on his Z and actually lost Torque from stock, until he got it tuned.

 

You most likely did not gain any horsepower from the aftermarket air intake.

To sum it up, you have a stock 350z with big fart cans in the back.

 

Did you install the JWT yet? How do you like it? I have read in previous posts that you can use the K&N cleaner. It just will not have the blue look anymore.

 

since you're gonna buy TP's get a better flowing Y pipe as well, and do that job all at once. you will notice the improved throttle response if you do those 2 mods at the same time.

 

YES, you can use K&N cleaner/recharge kit, the only thing is it will change the color of your filter to red. After washing it let it completly dry in room temps and after applying oil let it dry until putting back on the car. Don't let oil get to your MAF, it will kill it.

 

Eve if you get some on the MAF you can spray it with carb cleaner. I never had to because i did ti right, but it paranoid me when i put mine on

 

Buy the JWT Flywheel and Clutch kit.


Honestly, you probably only gained around 8-12rwhp with everything.

If I were you, I'd buy the JWT Blue oil. You can clean it with a normal, gentle laundry detergent. I did mine with detergent, and it came out very clean, but smelled like lavender.

 

I washed mine in the washing machine. It smellz like downy softner

 

I have an auto.

How does one determine the "gentleness" of laundry detergent?

 

by how soft it makes your laundry.