Independent Dyno Testers Needed!

Compare a Motordyne single or dual exhaust against stock or other aftermarket exhausts.

Same car, same day, same dyno, same tank of gas, same coolant temperatures, etc.

Dyno shop must have a lift so you can install the exhaust system at the facility.
Dynos must be done back to back and within 2-3 hours to minimize changes in atmospheric conditions.

Your car can be stock or fully modified but it cannot be running lean in its baseline condition and it must be running healthy. Send me your dyno plots with A/F graphs if you have any and list any mods you may currently have.

(A 10% discount applies for the introductory sale and there is an additional 10% Dyno Cash Back for independent dynos and the purchase will be arranged through Ebay for the Microsoft cash back rebate.)

WE CAN INCLUDE PLENUM SPACERS AND MREV2'S AS PART OF THE EXHAUST DYNO TEST FOR A MOTORDYNE TOTAL POWER PACKAGE!

Contact me to discuss eligibility.

Only a limited number of dynos are needed.





















The Dual Shockwave with Titanium mufflers and Titanium tips after the Motordyne Dyno Cash Back is $1280 (before the MS rebate)

The Dual Harakiri with Titanium mufflers and Titanium tips after the Motordyne Dyno Cash Back is $1840 (before the MS rebate)

The Single Shockwave with muffler and Ti tip after the Motordyne Dyno Cash Back is $848 (before the MS discount)
The Single Harakiri with Ti tip after the Motordyne Dyno Cash Back is $1088 (before MS discount)

Let me know when you are ready and I will put a system together specifically for you and place it on Ebay so you can take advantage of the MS rebate. I will send you a link to it.

And once its up, be sure to act quickly when you see the rebate percentage you like. If you don't see a good rebate at that time, you can try to wait it out. The MS rebate is like the stock market. It swings up and down wildly and at random.

Click this link to see where the MS cash back rate is.
http://www.taylorwilsdon.com/deals/c...ashback-amount

Click this link for MS rebate details.
https://my350z.com/forum/intake-exha...yne-parts.html

Tony

 

I would, but i doubt you want a test between your shockwave and Harakiri single exit.

 

We can do that too!

 

Bump for a respectable vendor.

 

Assuming NJ is too far away?

 

No. Not at all.

NJ is good!

 

Awesome. You have a pm!

 

I'll give you a ring monday.

 

iv already had sum1 offer me money for my single however I havnt heard this exhaust Tony so i cant help u out yet

 

+1 I'm down. If you can direct me to a Dyno Ill do this. I like in 10 mins from riverside.

 

Waiting for a true dual dyno vs motordyne dual dyno.

 

I don't know any dyno shops in riverside but GT Motorsports in Rancho Cucomonga is pretty close.

They certainly have the facilities to do a test.

 

Tony wanna test a Fast Intentions true dual on my Z which is back to stock now other than an intake? Let me know I can help you anytime you want just let me know and I don't need anything in return just helping a friend out.

 

Right on Ed!

PM'd.

 

that exhaust is gorgeous. All that gold heat wrap stuff looks pretty cool too.

 

I might be able to help out. Will it clear All the GrtSpec braces?

I just put the stock exhaust back on to do a stock dyno. Let me know...

 

I don't really know. Do you have the same brace as the one shown in the picture?
Let me know if you would like to try it.

 

Opps... GtSpec braces.

 

I haven't tried it with that brace.

 

I have them all (except fender braces) but the one that concerns me the most is the Rear Lower Tie Brace, the one in your picture is the Rear Lateral Arm Brace.

I will wait to see if somebody else has any luck.

Thanks