Advanced Resonance Tuning (ART pipes)
Vendor - Former Vendor
Joined: Oct 2008
Posts: 29
Likes: 0
From: Los Angeles
I have the ART on my car since 06-21-2010 and was quite happy. Less rasp, less noise. But today it has turned CEL on.
I am very worried. I drove 3000 km with Tomei test pipes + O2 spacer without CEL, and only 600 km with ART pipes and i have CEL on.
Hydracine, what could have happened? Happened to someone else? What is the solution?
I have a 350Z 2004.
I am very worried. I drove 3000 km with Tomei test pipes + O2 spacer without CEL, and only 600 km with ART pipes and i have CEL on.
Hydracine, what could have happened? Happened to someone else? What is the solution?
I have a 350Z 2004.
This is James from Motordyne Engineering.
I'm really sorry to hear what happened with the CEL.
This is a rare occasion since we've specifically engineered the ART race pipes to "not" put off CEL lights. My recommendation is to check the CEL code and pin point what exactly the CEL is warning you about. It could possibly be something else since the car is roughly 6 years old.
Please kindly find out more details; we will be able to better assist you with the additional info.
If you would like to contact our tech services, you can write an email to: info@motordyneengineering.com
We look forward to the result of your inspection.
Thanks!
James
Thread Starter
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Joined: Jul 2004
Posts: 4,399
Likes: 9
From: L.A. California
I have the ART on my car since 06-21-2010 and was quite happy. Less rasp, less noise. But today it has turned CEL on.
I am very worried. I drove 3000 km with Tomei test pipes + O2 spacer without CEL, and only 600 km with ART pipes and i have CEL on.
Hydracine, what could have happened? Happened to someone else? What is the solution?
I have a 350Z 2004.
I am very worried. I drove 3000 km with Tomei test pipes + O2 spacer without CEL, and only 600 km with ART pipes and i have CEL on.
Hydracine, what could have happened? Happened to someone else? What is the solution?
I have a 350Z 2004.
Tony
Registered User
Joined: Jan 2010
Posts: 40
Likes: 0
From: Spain
Dear Cockpit,
This is James from Motordyne Engineering.
I'm really sorry to hear what happened with the CEL.
This is a rare occasion since we've specifically engineered the ART race pipes to "not" put off CEL lights. My recommendation is to check the CEL code and pin point what exactly the CEL is warning you about. It could possibly be something else since the car is roughly 6 years old.
Please kindly find out more details; we will be able to better assist you with the additional info.
If you would like to contact our tech services, you can write an email to: info@motordyneengineering.com
We look forward to the result of your inspection.
Thanks!
James
This is James from Motordyne Engineering.
I'm really sorry to hear what happened with the CEL.
This is a rare occasion since we've specifically engineered the ART race pipes to "not" put off CEL lights. My recommendation is to check the CEL code and pin point what exactly the CEL is warning you about. It could possibly be something else since the car is roughly 6 years old.
Please kindly find out more details; we will be able to better assist you with the additional info.
If you would like to contact our tech services, you can write an email to: info@motordyneengineering.com
We look forward to the result of your inspection.
Thanks!
James
I doubt very much that has to do with the car six years old.
Last edited by cockpit66; Jul 6, 2010 at 04:08 PM.
Registered User
Joined: Oct 2007
Posts: 567
Likes: 1
From: Ohio, Cleveland
EDIT: Here's the thread for that...
https://my350z.com/forum/intake-exha...-clips-14.html
Last edited by uglyduc; Jul 7, 2010 at 01:31 PM.
Thread Starter
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Joined: Jul 2004
Posts: 4,399
Likes: 9
From: L.A. California
Absolutely.
An intake manifold. Already dyno tested with excellent gains.. Production is being setup for it.
Other than that, I can't give any other details until its released.
An intake manifold. Already dyno tested with excellent gains.. Production is being setup for it.
Other than that, I can't give any other details until its released.
http://www.youtube.com/watch?v=56mz9Ungh7s
http://www.youtube.com/watch?v=gS4HnqIRoS8
Registered User
Joined: May 2008
Posts: 548
Likes: 2
From: Tulsa, OK
Personally, I don't think you'll find a better performing or sounding setup on the market. But that's just my opinion.
To round out the video collection:
(... ART Pipes, Shockwave TDX V2)
*note - the sound/video clips begin around 2:00 if you get bored*
http://www.youtube.com/watch?v=Han8fRSMovA
Last edited by onagao; Jul 14, 2010 at 01:34 PM.
I have spread the word on the 370 boards, people seem to be really excited, especially us guys that came from a 350 and used motordyne parts. What about ART pipes for the 370?? thnx!
