Notices
Intake Exhaust Moving all that air in and out efficiently

CNT Racing Nissan 350z high flow cats installed pictures.

Thread Tools
 
Search this Thread
 
Old 12-23-2012 | 05:12 PM
  #81  
stascom's Avatar
stascom
Registered User
 
Joined: Jun 2012
Posts: 187
Likes: 2
From: Southern Oregon
Default

Originally Posted by vtchang
Define rough? You're leaving a lot on the table without the tune. I ran HFC CNT w/o a tune for some time and the car drove fine... just missed out on 30ft-lb of torque. This of course applies to all HFC and Test Pipes and not just CNT's HFC. CNT were just the cheapest at the time but boy am I paying for it. These bad boys hiss like nobody else's business.

https://my350z.com/forum/mid-atlanti...-it-again.html
I'm not worried about unclaimed power. I just know that, if, for example, you swap the downpipe in a boosted car without tune - expect serious problems. Want to make sure that I won't be doing any damage while running it through summer (when I will be getting the tune done).
Old 01-02-2013 | 11:12 AM
  #82  
corsairprime's Avatar
corsairprime
Registered User
 
Joined: May 2008
Posts: 64
Likes: 0
From: Frisco, TX
Default Since this posting - any SES light?

Originally Posted by ap2_S2Kyle
Ive had these for about a year now along with the invidia gemini...LOVE IT and theyve been great so far. http://www.youtube.com/watch?v=Gj5GMxE3u5E
Just a question. Since you posted this, have you experienced an SES light with the CNT HFCs in place? I was thinking about swapping my BERK HFCs for these if they fight the SES light.

Your car sounded great on the video by the way.
Old 01-08-2013 | 01:31 PM
  #83  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

The version 2 of this 03-06 Nissan 350Z HFC has been release.

Last edited by NissanGeneration; 01-11-2013 at 12:32 PM.
Old 01-14-2013 | 11:50 AM
  #84  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

At ERZperformance we don't want you to pay too much for performance parts. Please call, email, PM for best price. Please visit our site and save Performance parts for Subaru, Nissan, Mazda, Honda and Mitsubishi.

If you don't see something listed please PM, call, or email us. We will try our best to give you the best price and service.

Please call 800-363-8599 from 9.30-5.00 PM PST or email us at sales@erzperformance.com

Bay area CA customer we are located in Hayward CA, local customers give us a call at 800-363-8599
Old 01-15-2013 | 09:20 PM
  #85  
xsackofricex's Avatar
xsackofricex
Registered User
 
Joined: Jul 2003
Posts: 10
Likes: 0
From: n/a
Default

Originally Posted by NissanGeneration
The version 2 of this 03-06 Nissan 350Z HFC has been release.
What's the difference between version 1 and 2?
Old 01-15-2013 | 10:29 PM
  #86  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

Originally Posted by xsackofricex
What's the difference between version 1 and 2?
The version 2 comes with a "two steps welding" process during manufacturing on the flanges to ensure a complete flatness without any possibility of exhaust leak.
Old 01-17-2013 | 05:43 PM
  #87  
tylerxfire's Avatar
tylerxfire
Registered User
iTrader: (15)
 
Joined: Jul 2008
Posts: 3,817
Likes: 1
From: new york
Default

whats the best price on these now shipped to 13357..i assume they will be the same fitment on a g35..i have an 04 coupe..i used to run berks on my z but im considering these for the price..how legit is the check engine light fix and do they give rasp or hissing?

i am going to be adding these to my invidia gemini cat back
Old 01-18-2013 | 02:55 PM
  #88  
Esoj's Avatar
Esoj
Registered User
iTrader: (3)
 
Joined: Jun 2011
Posts: 39
Likes: 0
From: Washington
Default

^^^ +1 also regarding the check engine light fix. Price shipped to 98087 for the version 2 of this 03-06 Nissan 350Z HFC. Thanks
Old 01-18-2013 | 07:01 PM
  #89  
ZWolf81's Avatar
ZWolf81
Registered User
 
Joined: Jan 2012
Posts: 48
Likes: 0
From: Murfreesboro TN
Default

+1 here too. Really considering these becasue my stock cats need to go and the price is very nice!
Old 01-19-2013 | 02:48 AM
  #90  
xsackofricex's Avatar
xsackofricex
Registered User
 
Joined: Jul 2003
Posts: 10
Likes: 0
From: n/a
Default

Just making sure, is the piping all mandrel bent or is it crushed bent?
Old 01-21-2013 | 01:40 PM
  #91  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

Originally Posted by xsackofricex
Just making sure, is the piping all mandrel bent or is it crushed bent?
Yes piping is mandrel bent.
Old 02-08-2013 | 11:31 AM
  #92  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

Only few more in stock.
Old 02-21-2013 | 12:44 PM
  #93  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default



It's Thursday at ERZperformance we don't want you to pay too much for performance parts. Please call, email, PM for best price. Please visit our site and save Performance parts for Subaru, Nissan, Mazda, Honda and Mitsubishi. Please visit our ebay store stores.ebay.com/ERZ-performance

If you don't see something listed please PM, call, or email us. We will try our best to give you the best price and service.

Please call 800-363-8599 from 9.30-5.00 PM PST or email us at sales@erzperformance.com



Check out our feedback from Nasioc.

http://forums.nasioc.com/forums/itrader.php?u=61525
Old 03-13-2013 | 12:08 PM
  #94  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default



at ERZperformance we don't want you to pay too much for performance parts. Please call, email, PM if you have any questions. Please visit our site and save Performance parts for Subaru, Nissan, Mazda, Honda and Mitsubishi. Please visit our ebay store stores.ebay.com/ERZ-performance

If you don't see something listed please PM, call, or email us. We will try our best to give you the best price and service.

Please call 800-363-8599 from 9.30-5.00 PM PST or email us at sales@erzperformance.com



Check out our feedback from Nasioc.

http://forums.nasioc.com/forums/itrader.php?u=61525
Old 03-19-2013 | 02:07 PM
  #95  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default



At ERZperformance we don't want you to pay too much for performance parts. Please call, email, PM if you have any questions. Please visit our site and save Performance parts for Subaru, Nissan, Mazda, Honda and Mitsubishi. Please visit our ebay store stores.ebay.com/ERZ-performance

If you don't see something listed please PM, call, or email us. We will try our best to give you the best price and service.

Please call 800-363-8599 from 9.30-5.00 PM PST or email us at sales@erzperformance.com



Check out our feedback from Nasioc.

http://forums.nasioc.com/forums/itrader.php?u=61525
Old 03-25-2013 | 03:02 PM
  #96  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default



at ERZperformance we don't want you to pay too much for performance parts. Please call, email, PM if you have any questions. Please visit our site and save Performance parts for Subaru, Nissan, Mazda, Honda and Mitsubishi. Please visit our ebay store stores.ebay.com/ERZ-performance

If you don't see something listed please PM, call, or email us. We will try our best to give you the best price and service.

Please call 800-363-8599 from 9.30-5.00 PM PST or email us at sales@erzperformance.com



Check out our feedback from Nasioc.

http://forums.nasioc.com/forums/itrader.php?u=61525
Old 03-25-2013 | 05:23 PM
  #97  
F2CMaDMaXX's Avatar
F2CMaDMaXX
New Member
iTrader: (2)
 
Joined: Sep 2011
Posts: 1,751
Likes: 7
From: Oregon from England
Default

Do you sell OEM parts?

Motor mounts and gearbox for a 2k4?
Old 05-25-2013 | 06:44 PM
  #98  
michaelmoon912's Avatar
michaelmoon912
Registered User
 
Joined: May 2012
Posts: 132
Likes: 0
From: North Richland Hills, TX
Default

Are these in stock?

Price to 76180
Old 05-28-2013 | 09:36 PM
  #99  
NissanGeneration's Avatar
NissanGeneration
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Nov 2007
Posts: 2,714
Likes: 0
From: Hayward CA, USA
Default

Originally Posted by michaelmoon912
Are these in stock?

Price to 76180

Sorry they are currently in back order ETA is 8 weeks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JjL
East Canada
10
06-12-2019 04:04 AM
Cam2662
Exterior & Interior
10
09-22-2015 06:00 AM
EnjukuRacing
Engine
0
09-11-2015 09:34 AM
VQA33
Wheels Tires
8
09-08-2015 09:30 PM




All times are GMT -8. The time now is 05:59 PM.