New info on Isdunique's Plenum!
01-08-2004, 09:26 AM
#63
Registered User
I am also VERY interested in the platic plenum. Please keep up posted on when we can order this peice.
Also assuming we can keep the stock strut bar will the plastic plenum flow as good or better then the crawford plenum? Better gains due to lack of heat soak?
John
Also assuming we can keep the stock strut bar will the plastic plenum flow as good or better then the crawford plenum? Better gains due to lack of heat soak?
John
Last edited by daytona350zr; 01-08-2004 at 09:28 AM.
01-08-2004, 03:04 PM
#67
Registered User
iTrader: (3)
Join Date: Oct 2002
Location: Santa Ana, CA
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
There are no needs for comments like that, please no need for a competition, especially since we don't even have a plenum available. There are no promises here other than we promise to give this our best efforts. The chance of it coming to market are VERY high but there is always a chance things don't work out.
As I am seeing it, there will be no 350z logo on the plenum. We will most likely do a small, and tasteful company logo, but then add some cosmetic additions that will also serve as structural support. We will also leave a decent flat area for your own personal tastes, also remember that these are paintable as well.
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.
As I am seeing it, there will be no 350z logo on the plenum. We will most likely do a small, and tasteful company logo, but then add some cosmetic additions that will also serve as structural support. We will also leave a decent flat area for your own personal tastes, also remember that these are paintable as well.
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.
01-08-2004, 05:55 PM
#69
Banned
iTrader: (34)
Join Date: Apr 2003
Location: I'm A Gypsy
Posts: 8,663
Likes: 0
Received 0 Likes
on
0 Posts
I got ur JIC right here (or at least, will soon:-D). where you do want it shipped? pm me or email wren57@aol.com . Thanks.
01-09-2004, 07:39 AM
#72
Registered User
Thread Starter
iTrader: (5)
Join Date: Aug 2002
Location: Copacabana, Rio de Janeiro BR
Posts: 1,721
Likes: 0
Received 0 Likes
on
0 Posts
here's another update.....
isdunique's website is now up and running
it is kinetixracing.com or to make it even easier for everyone out there, click here
Kinetix Racing .com (Isdunique's new website)
no, the plenum is not on there just yet but he does have a couple of other nice items that might interest you.....
take a look!
BTW - Nice job on the new site, looks GREAT!
isdunique's website is now up and running
it is kinetixracing.com or to make it even easier for everyone out there, click here
Kinetix Racing .com (Isdunique's new website)
no, the plenum is not on there just yet but he does have a couple of other nice items that might interest you.....
take a look!
BTW - Nice job on the new site, looks GREAT!
Last edited by all_bark; 01-09-2004 at 07:42 AM.
01-09-2004, 11:31 AM
#73
Registered User
iTrader: (10)
Join Date: May 2003
Location: SF Bay Area
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by lsdunique
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.
how about the greddy strut bar?? not sure if there is a major size difference between the greddy and the JIC.
01-09-2004, 07:29 PM
#77
Registered User
Originally posted by lsdunique
There are no needs for comments like that, please no need for a competition, especially since we don't even have a plenum available. There are no promises here other than we promise to give this our best efforts. The chance of it coming to market are VERY high but there is always a chance things don't work out.
There are no needs for comments like that, please no need for a competition, especially since we don't even have a plenum available. There are no promises here other than we promise to give this our best efforts. The chance of it coming to market are VERY high but there is always a chance things don't work out.
My sincerest commendations lsdunique! As with anyone, we're all excited to see more product hit the market. Good luck with everything!
01-09-2004, 07:40 PM
#78
Registered User
iTrader: (19)
Join Date: Jun 2002
Location: newport beach. so cal
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by all_bark
here's another update.....
isdunique's website is now up and running
it is kinetixracing.com or to make it even easier for everyone out there, click here
Kinetix Racing .com (Isdunique's new website)
no, the plenum is not on there just yet but he does have a couple of other nice items that might interest you.....
take a look!
BTW - Nice job on the new site, looks GREAT!
here's another update.....
isdunique's website is now up and running
it is kinetixracing.com or to make it even easier for everyone out there, click here
Kinetix Racing .com (Isdunique's new website)
no, the plenum is not on there just yet but he does have a couple of other nice items that might interest you.....
take a look!
BTW - Nice job on the new site, looks GREAT!
btw those fron a-arms are already available?
i may just have to order em
01-10-2004, 09:45 PM
#80
Registered User
iTrader: (3)
Join Date: Jun 2002
Location: Los Angeles
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Strut Bar
I have a carbon fiber JIC Strut Tower I would be willing to lend you for two weeks...as long as there is no damage to it and if there is you agree to replacing it..I'm really excited about the possibility of a plastic plenum. Let me know..I still have my stock one I can use in the mean time.
Originally posted by lsdunique
There are no needs for comments like that, please no need for a competition, especially since we don't even have a plenum available. There are no promises here other than we promise to give this our best efforts. The chance of it coming to market are VERY high but there is always a chance things don't work out.
As I am seeing it, there will be no 350z logo on the plenum. We will most likely do a small, and tasteful company logo, but then add some cosmetic additions that will also serve as structural support. We will also leave a decent flat area for your own personal tastes, also remember that these are paintable as well.
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.
There are no needs for comments like that, please no need for a competition, especially since we don't even have a plenum available. There are no promises here other than we promise to give this our best efforts. The chance of it coming to market are VERY high but there is always a chance things don't work out.
As I am seeing it, there will be no 350z logo on the plenum. We will most likely do a small, and tasteful company logo, but then add some cosmetic additions that will also serve as structural support. We will also leave a decent flat area for your own personal tastes, also remember that these are paintable as well.
**Also, I am making a small request from the forum members here, we will need a JIC strut bar to make sure that we clear this strut bar as well, not just the factory bar. We would need the bar for approximately 1-2weeks after which it will be returned in the same condition. It will only be used for fitment issues. To show our appreciation, we would be willing to give a decent discount and a priority in the first units made. The risk would be that in a worst case scenario, the plenum never makes it to market and you were out a strut bar for 2 weeks. PM for details if interested. We have always shown our appreciation for people who help us.