Blinkers work but Hazards do not!
Does anyone know what i should look for? when i got the car it had the blue HID wanna b lights installed for the blinker and reverse lights. I have replaced those with some of the silver coated bulbs. The blinkers work perfect but when i hit the hazards nothing happens. Thanks in advance for any help!
If the fuses are intact, then perhaps the on/off switch for the hazards has been disconnected. You'll have to remove the center console to check. That isn't too difficult; pull the part surrounding the shift boot and there are (I think) five screws holding the center console on. Two towards the front, one under the ashtray and two on either side towards the rear of the console.
Ok I just discovered that the fuses for the lights are in the hidden fuse box behind the battery. To get to it requires removing the battery and the fuse box in front of it, does any one know for sure if the blinkers could still work if the fuse for the hazards has blown? I just want to make sure before I pull the battery out! Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM




