How do i remove the headlight assembly???
#2
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: E
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
There are about 4 bolts to remove off the headlight.. you will need to take the bumper off... So that involves taking all of the bolts off the bottom splash plate, inner well liners... then after you pull the bumper off it will be easy to unbolt the headlight and unhook the harness.
oh wait, what do you mean by globe? bulb?
oh wait, what do you mean by globe? bulb?
#3
Registered User
Thread Starter
All i know is one of my headlights aren't working. Not familiar with the lingo.
So your telling me i need to remove the whole front bumper to get to the headlight? Or do i just take apart the inner wheel liner and access it from there?
So your telling me i need to remove the whole front bumper to get to the headlight? Or do i just take apart the inner wheel liner and access it from there?
#6
Registered User
iTrader: (1)
Join Date: Jun 2003
Location: usa
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
To replace the lower high beam bulb, you need to remove the fender protector.-
In order to replace the upper low beam, the front bumper must be removed in order to remove the headlamp assembly.-
Afterwards, perform an aiming adjustment.-
In order to replace the upper low beam, the front bumper must be removed in order to remove the headlamp assembly.-
Afterwards, perform an aiming adjustment.-
Last edited by XtaZee; 03-26-2006 at 10:50 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM