tach bouncing at low rpms and car lagging! help!
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: NJ
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
![Exclamation](https://my350z.com/forum/images/icons/icon4.gif)
This all happened when I was pulled over on the side of the road because I missed and exit. when I went to take off again my VDC was off and I was on those bumps on the side of the road (the ones so you dont drift off to sleep) I did a rather harsh takeoff because there was alot of traffic. after that I noticed my tach fluttering at low rpm's and the car lagging with it not accelerating properly. I inspected the car thinking it might be the exhaust but couldnt find anything. the problem seems to come and go. I hit some more bumps after that and it started doing it again. I'm thinking its the transmission or driveshaft? really dont know. I'll put it on a lift soon. It just happened tonight.
please help!
please help!
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jul 2007
Location: NJ
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
ok so I reset the ecu and cleaned the maf.I have a new symtom today the car makes loud knocking noises over bumps or turns -happens alot almost as if something is popping...acceleration problem is still happening..
I schedualed apt at the dealer for next thurs
I schedualed apt at the dealer for next thurs
#12
Registered User
Thread Starter
Join Date: Jul 2007
Location: NJ
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
ok so I got a service engine soon light so- I checked the codes and got P0230 or catalist efficency below threshhold bank 2...could this be the problem with my accleration? I cleared the code so I'm going to drive it tommorow and see if it will come back on in a drive cycle.
please help!
please help!
#13
Registered User
Thread Starter
Join Date: Jul 2007
Location: NJ
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
so nissan wont work on my car because I have too many after market parts! wtf! I have to take it somewhere else! their blaming my aftermarket sway bars for noise when thats clearly not it. ***** idiots!
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
06-19-2022 06:30 PM