I just got my Z almost 2 weeks ago now, and just this week the passenger window just wont roll down. When the door is opened it will go down a little bit and when closed it will go up just the little bit(what the Zs do automatically). But when I try to use the switch it does nothing, anyone had a problem like this?

 

lol this sounds crazy ... but while your pushing the button to roll it down , hit the inside of the door haha !! mine gets stuck sometimes too .. i'm not sure if thats the same for you but it never hurts to try :-)

 

What year? I assume this isn't a new Z. There are problems with the window motors on certain years. Do a search.

 

slam the door. if it works afterwards your motor could be failing or have a good amount of carbon build up.

also, this might sound dumb .. but make sure you don't have the window lock on. it's located on the drivers side ..

 

There is a detailed thread about this here - it's actually the reason I signed up on this site (I have the same problem, and needed to research it, which brought me here).

 

thanks guys, I think I'm going to try to clean the motor and see how that works. 85 degrees with one window going down sucks

 

this doesnt make me happy, my passenger side rolls up and down a tad bit slower than the drivers side.

the passenger makes it to about an inch open by the time the drivers side is fully up. doesnt make much sense considering i use my drivers side much more often than passenger.