Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Need Fuel Injector Help Please!!

Old Apr 17, 2010 | 06:17 PM
  #1  
WestieQ's Avatar
WestieQ
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 11
Likes: 0
From: New York
Default Need Fuel Injector Help Please!!

I have been trying for weeks to get information on the fuel injectors for my Z and I can't seen to get the data anywhere. I've called Bosch customer service, Bosch Motor sports, and even their administrative office in IL and still no answer.

Here's what I need: Bosch Fuel Injector, Part No. 0280158117

Dead Time

Battery Voltage Offset Table

Close and Open Time

I really need this info to be able to get my Z running properly (2004 Touring 6spd. Turbo Charged). In fact, I am offering a $25 reward to whoever gets me the correct info! Please trust me on this, I'm serious. I will mail a money order to whoever can get this data correctly!

Thanks all for the help.

you can e-mail me at "larjoyquig@yahoo.com" or "lgiglio@cusa.canon.com"

Larry
Reply
Old Apr 18, 2010 | 07:59 AM
  #2  
WestieQ's Avatar
WestieQ
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 11
Likes: 0
From: New York
Default Moved?

My question about fuel injectors was moved to some other area. Does anyone check this location?
Reply
Old Apr 23, 2010 | 01:07 AM
  #3  
Synjn's Avatar
Synjn
Registered User
iTrader: (1)
 
Joined: Jul 2009
Posts: 278
Likes: 1
From: Anaheim, CA
Default

Originally Posted by WestieQ
I have been trying for weeks to get information on the fuel injectors for my Z and I can't seen to get the data anywhere. I've called Bosch customer service, Bosch Motor sports, and even their administrative office in IL and still no answer.

Here's what I need: Bosch Fuel Injector, Part No. 0280158117

Dead Time

Battery Voltage Offset Table

Close and Open Time

I really need this info to be able to get my Z running properly (2004 Touring 6spd. Turbo Charged). In fact, I am offering a $25 reward to whoever gets me the correct info! Please trust me on this, I'm serious. I will mail a money order to whoever can get this data correctly!

Thanks all for the help.

you can e-mail me at "larjoyquig@yahoo.com" or "lgiglio@cusa.canon.com"

Larry

Got it!

http://www.fiveomotorsport.com/impor...s/?itemid=1208

njector type: 6-hole disc, EV14

Flow pattern: narrow cone

Tested Flow Rates:

500cc/min at 3 BAR

540cc/min at 3.5 BAR

580cc/min at 4 BAR

Resistance: 12.8-14.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Pressure: Min. 36 PSI (2.5 bar), Max. 130 PSI (9 bar)

Dead Time: 0.7ms at 14 volts

Surface finish: Black composite

All Viton o-rings Included for installation.

Import 4 and 6 cylinder cars.

Last edited by Synjn; Apr 23, 2010 at 01:09 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:57 PM.