Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Kick Panel Fuse Area

Old Feb 29, 2012 | 07:25 PM
  #1  
Gadgetgirl's Avatar
Gadgetgirl
Thread Starter
Registered User
 
Joined: Feb 2012
Posts: 8
Likes: 0
From: Central Valley
Default Kick Panel Fuse Area

I have an 2008 A/T and today it would not move out of the park position into reverse or any other. I played with it for a little bit, not forcing it, turned the motor off and then back on. It finally went into reverse after a few tries. After reading several posts it says to check fuse slot 12 behind the driver side kick panel. I have no idea which slot is #12 or if this is even the issue. Thanks to anyone who responds.
Reply
Old Feb 29, 2012 | 08:28 PM
  #2  
dkmura's Avatar
dkmura
General & DIY Moderator
MY350Z.COM
Premier Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (64)
 
Joined: May 2002
Posts: 8,623
Likes: 1,392
From: Aurora, Colorado
Default

First, I don't own an auto, so I can't speak from experience. Once you pull off the cover of the fuse panel, look at the diagram on the inside and it'll list each fuse and amperage and you should be able to figure out which fuse has anything to do with your tranny.

Having said that, I doubt your problem is going to be resolved from the fuse panel. Have you tried the shift override that is usually located on the shifter console? It allows you to put the car into neutral from park.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
3vilbunny
Exterior & Interior
24
Jul 18, 2017 05:10 PM
D_Rod
Upcoming Events
3
Sep 29, 2015 04:42 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:20 AM.