Refrigerant pressure sensor
#1
Registered User
Thread Starter
Join Date: Jul 2012
Location: Ohio
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Refrigerant pressure sensor
I went through the search engine first and my service manual and could not find the answer anywhere. Basically what i have going on is i just bought an 04 350 yesterday and one of the things that was said to be wrong was the a/c doesn't work. Was told the pressure was checked and was fine. During the inspection of the car i noticed there were six wires that had bare ends with no connector. more than likely i will also have a blown fuse. Ive done enough research to be able to find out that they are the wires for the refrigerant pressure sensor but no plug so i have no problem soldering these wires together or making my own connector the issue im having is finding what wires mate with what wires on each end of the plug. if someone could find the schematic that would be awesome or even just pop there hood and look at the connector and relay to me what they see it would be mighty sweet of you. thanks for any help
#2
Registered User
I have the bumper off of mine right now, PM me an email address and I can send you a picture of the connector. Mine has an extra "extender" pigtail in it, that goes from the main harness to the actual sensor.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM