omega007

Hi, does this ball joint on the compresion arm/ banana arm looks damaged?

travlee

iTrader: (8)

try uploading by clicking on this

travlee

iTrader: (8)

boot is def torn, i would replace

omega007

done, check it now please

omega007

Thanks.

whats are the best affordable aftermarket arms, i believe moog for the price/ quality but i could be wrong. i read dormant have fitment issues and moog is better quality.

travlee

iTrader: (8)

just replace the ball joint... they press out

https://www.z1motorsports.com/suspen...nt-p-8187.html

omega007

This is is the banana arm. can't be replaced, the ball joint is upside down on that arm, do you still see it torn looking it like this?

travlee

iTrader: (8)

what year is the car?

omega007

2005

travlee

iTrader: (8)

part #10 in this pic?

omega007

is part 14 on this one:

travlee

iTrader: (8)

if it were me, i would replace with oem, but if you have a budget you could look into the cheaper options

iideadeyeii

iTrader: (6)

PASSANGER
http://www.ebay.com/itm/Front-Lower-...FZgYaR&vxp=mtr

DRIVERS
http://www.ebay.com/itm/Front-Lower-...BZgYaR&vxp=mtr

guitman32

iTrader: (15)

If its just torn and noticing no ill effects, you do not need to replace. A mechanic could tell you in about 10 minutes.

omega007

i have a clunking on that side. but i also need a new upper spring insulator, and my lower control arm bushings look like are starting to crack on the sides of the arm in a vertical line.

but i don't want to pay the work 2 or 3 times guessing parts, this car still has some parts that haven't been changed since new.

i bought some new:

- strut mounts
- strut mounts insulator
- Banana arms
- Upper arms
- Lower control arms bushings
- knuckle ball joints, in case they are bad

I have changed not so long the inner and outer tie rods, sway bar links, and my sway bar bushing looks good.

now i just got to wait like 2 weeks to get all and install it

travlee

iTrader: (8)

Disadvantage of living on an island....was there in march and loved the ocean and beach.

travlee

iTrader: (8)

Oh, and the pineapple.......best ever

omega007

Cool.

Yes and worse than the waiting is that i have to pay almost $4 per pound and this parts weight a ton

I wish i lived in Miami instead,

omega007

Hi just to update. I replaced all my front arms, ball ball joints, strut mounts and links. And still had a clicking on the car.

No mechanic i wen't was able to figure it out. But i startet looking videos online and suspected a bottom engine mount support nut from a video i saw.

I went to the car and reach for it and it was so loose i could turn it with a single finger.

I coun't believe the issue i had for a couple of years, but just now recently was getting too frequently was so simple.

But i screwed it good and went for a ride and no more sound. Feels like new.

Feels good to finally have this fixed. And finally knowing what it was.

And my car isn't embarrasing no more on bumps or bad roads.