Hi y'all,
After years of having my top tied down due to a bent frame, I have finally obtained a replacement! It seems pretty straight forward, but I wanted to check in here to see if there are any tips or tricks I should know about before getting started? I've been having the hardest time finding any videos or guides on the process. Thanks!

 

Good for you on tackling such a project!

I've attached the RF (roof) section of the FSM here. Hopefully it helps!

I'm not sure if there are any write-ups about replacing the entire roof assembly on here. There's a good one regarding the soft top in the roadster section.

Good luck and maybe start a DIY thread?

 

Thanks! This will be a helpful tool.

Good idea about the DIY thread as well. Never hurts to try other outlets. I'll update if I find anything of value.