kno

iTrader: (22)

I don't think there would be a problem if you buy the abs replica spoiler. The bumper on the other hand I would but the authentic one just to make sure fitment is on point and it's abs for durability. It's all about patience and persistan when it comes on finding v3 parts. Keep checking fb classifieds and ebay. Search for "350z oem nismo" and if you find any original part from the nismo z check into his other stuff which most of the time he has more than one part feom that car laying in his inventory. I saw a guy that is selling his complete near mint v3 rear bumper in nogaro red with blinker light assembly and all for 900 obo free shipping. I would place an offer and see where it goes.

On another note I started the first mod of the year, I scored a nice nismo differential cover for a steal and restored it. Now I'm obligated to find a nice lsd to go with it. I have a pumpkin laying around in the garage that I'll start building with new parts. My plan is once it's all completed with oil and all I'll swap the vlsd pumpkin I have on the z now. I think this year I'm gonna do drivetrain mods and start on my deteriorating interior. Sunday while taking an uncomfortable nap in the z I noticed the cloth of the headliner is staring to sag where the visors are. Also the leather of my steering is wearing pretty bad.

kno

iTrader: (22)

Ehh guys.. I think I have I problem. I'm buying shet I don't need lol. but its too pretty to not buy it right? Only 1636 made. I might even install the nismo exhaust for a few months till Im ready for the Osiris tune I've prolonged for 5 years lol. Anyways enjoy some pics.


Here is how it compares to the non nismo z exhaust. I gotta say it's damn sexy. If only it was TI.

MicVelo

1,607.

Not that I'm pedantic or anything.

kno

iTrader: (22)

MicVelo

Psh, nothing even close to ownership, dude.

But when one owns a Nismo, one doesn't want to hear there's MORE as any number quoted above the actual number of 1607 makes it that much LESS rare. Hahahahahahahahahahahaaaaaaaaaaaa!!

I keed! I keed!

clubhopper

iTrader: (6)

I love this build! As a fellow Nismo lover I appreciate what you have done! Good to see the attention to detail to Nismo-fy your Z!

kno

iTrader: (22)

kno

iTrader: (22)

Edited my video, first time I've attempted this. I think it came out pretty good enjoy.

MM'08_350Z

iTrader: (5)

What size tires you running on the Nismo Wheels Kno? Also are you on spacers? If so what size?

nizmo_0385

iTrader: (5)

Definitely spacers. I too asked but no reply yet. Im going to also run spacers thinking 25mm rear 15mm front

kno

iTrader: (22)

Sorry fellas. I'm running 10 mm front and 15 rear spacers. tires are firestone firehawk wide oval 285/35 R and bridgestone rea50 265/40 F on tanabe sustec pro 5 coilovers. Im on oem spec alignment. Kinetix A arms and spl rear toe arms and bolts. I'm gonna go 35 profile on my front tires because I find them too tall for the 18 inch wheel. Even though both front and rear have the same diameter and fill the wheel wells equally. I hope this helps.

kno

iTrader: (22)

Piling up some goodies for the z..
Jwt light flywheel
Jwt clutch/ pressure plate
Ss braided hydraulic clutch line
Nismo finned different cover
Firestone fire hawk wide oval 285 35 19

I'm looking into replacing my consentric slave cylinder (csc) but I'm not sure to get a replacement part from Nissan or go for the will wood one or z1?..

rustyschopshop

I don't have the concentric style on mine but everyone recommends going with the upgrade.

kno

iTrader: (22)

Yeah but I don't know which. There are some that you have to drill through the bell housing and other like z1 that modifies like half the transmisión and costs lie 400 plus labor to buy. Zspeed sells a heavy duty stock csc that's what's calling my attention at the moment it's $190

rustyschopshop

Zspeed has done some great work with our cars, I am running their tilton racing cmc upgrade. I would call them and get some details. Cut out the middle man and hear it from their lips. Z1 does great from what I have read as well but agree that may take more work.
By the time I did my cmc and slave upgrade on my de I was close to $300 with lines and fluid.

kno

iTrader: (22)

I'll give them a call thanks for the tip.

kno

iTrader: (22)

Some eye candy for the thread

XM 1

iTrader: (5)

truelly some eye candy really love your Z kno. absolutely well done!

kno

iTrader: (22)

Thanks dude!

MicVelo

Dang it G'mo, there you go again.

Making me miss my Niz just when I thought I was over it. Laff.

Dayamit.

So many nice Zs here that my favorites list is dynamic and constantly in flux. Butt seriously, yers is still - and shall remain so for the foreseeable future - in my Top 5.