I talked to Travis at JE Performance in Rosedale and they are hosting a Dyno Day this Sunday from 10-6. $55 for 3 pulls with Air/Fuel ratio if you pre-register. You can call him at 410-686-5111. I had a dyno scheduled for eariler this week and it was canceled when I called back to reschedule, they let me know about this, sorry for the late notice. I'll be there between 10-11 for my first run with the modified and ported lower plenum. Anyone else?

 

let us know how you do. im wondering about getting a spacer to go with the MRev2. of course ill have to get it tuned but interested in how you do.

 

I'll have the results posted on the plenum thread. There are a few people I have been talking to the whole way through it that are as inpatient as I am about seeing the numbers.....

 

I'm out for this one. I'm attending a graduation party.

 

What kind of Dyno do they use?

 

I just talked to James, the owner of JE Performance, they have a Dynapac. I'm told they are the most accurate dyno out there. There are no spinning drums, they remove your rims and tires and hook it up to the hubs. The readings are more accurate. They can also do AWD cars. They were primarly a 300zx shop but now they are doing tuning on all imports.

under construction at the shop they have a G35 that is getting a Skyline motor installed and will be in an upcoming issue of Turbo mag. They are looking to get 700hp + out of it Top Seceret in Japan has done the swap, this will be the first swap in the US.

 

hey bud i cant get there till about 12:30 are you still gonna be there.

 

I did not get a chance to preregister, is there any chance I can still get in on this?

 

same here but i did email him.charles i think well be ok.i called mike on his cell and left a message.ill be on the golf course untill about 10:00 up in pennsylvania.

 

What time are you guys getting there? I might be able to meet towards 11am.

 

What time are you teeing it up, 6am?

 

I'm getting there about 11 and I'll be there for a little while.

 

yep ill be there about 12:00,i just want to know what my a/f is i dont care about power.

 

Cool Murph...I'll meet you there around 11am.

 

On my way.

 

ill be there before 12:00.

 

james is a pretty cool guy,im gonna get my gauges installed by him.i forgot about the 13% difference in drivetrain loss on a auto vesus a manual trans.james said its prolly more then that,so when i figure what the other guys with the stillen are doing,im right in the ball park.and damn im running pig rich.btw that rb26(i think thats what its called) is going to be sick.that motor can handle a ton of boost like the supra,s do.

 

He said they are supposed to be finished by 6/14......they still have some work to do.

 

your not gonna believe this.i was kinda pissed at the results even though im an auto.a buddy of mine stopped over today and we were talking about the results.we decided to go back over to his house where he has a autometer mechanical boost gauge.so we hooked it up and guess what,that fukin stillen stage 3 pulley is supposed to put out 7-7.5 psi,well it put out 5.8 psi.thats the same it put out on stage 2,i cant wait to call those a-holes tomorrow at stillen.i did see 2 other posts where they sent the wrong pulley but still.dammit i tell you dammit. btw all the belts are tight as ****.oh i cant wait for monday for the first time in my life.

 

Keith how rich where you?