Merry Christmas to Me! ... Oh and uh to everybody else too ...
#21
Originally Posted by dutchboy350Z
Anytime bud ... weather just needs to get nicer. I haven't driven it in a week now.
had to be like 40 degrees. lol. all bundled up with a grin!! priceless....
#24
Thread Starter
Finally some go
iTrader: (5)
Joined: Jun 2006
Posts: 6,940
Likes: 3
From: Santa Barbara, CA
I'm just gonna cut and paste what I left on the my other thread:
Ok my Z is dirty as hell (I threw the box, instructions and everything else on the passenger side carpet) and the molding around the e-brake needs to be glue back in place.
That being said here's some pics.
BTW taking the oem **** off was pretty easy.
All I did was put a clamp wrench on the shaft of the shifter and twisted the **** off counter clockwise with my hand. I found is easier to remove the finisher altogether before removing the ****. All I had to do was find a secure spot under the shift boot and clamb down on it.
I'll take some better pics during the daytime (some of them were blurry)
Ok my Z is dirty as hell (I threw the box, instructions and everything else on the passenger side carpet) and the molding around the e-brake needs to be glue back in place.
That being said here's some pics.
BTW taking the oem **** off was pretty easy.
All I did was put a clamp wrench on the shaft of the shifter and twisted the **** off counter clockwise with my hand. I found is easier to remove the finisher altogether before removing the ****. All I had to do was find a secure spot under the shift boot and clamb down on it.
I'll take some better pics during the daytime (some of them were blurry)
#26
Thread Starter
Finally some go
iTrader: (5)
Joined: Jun 2006
Posts: 6,940
Likes: 3
From: Santa Barbara, CA
Originally Posted by mx22o
looks good.. matches your door panals and your leather seats
are you going to install the blue carbon fiber dash?
are you going to install the blue carbon fiber dash?
Thread
Thread Starter
Forum
Replies
Last Post
Vigman
Maintenance & Repair
17
11-17-2015 04:34 AM