harness bar and lap harnesses are really easy, i'll snap some pictures tonight.

 

That would be great, thanks.

 

What he said

 

your car must be fast...

 

got any pics

 

^ ... at least he used the search function

 

i'll see what I can pull up later

 

FYI, I have the SCCA general competition rules that describe in detail what to do for cages/roll bars and driver restraint. Not competition spec but I put my crotch belt to the front seat bolt. Works fine and none of the SCCA tech guys have complained on inspection for track days.

 

any ETA on those pictures? im installing my harness today and the only thing ive got left to do is to drill the holes for the lap belt but im not exactly sure where to drill bc i dont want to go through and find wires hidden under the metal or a fuel line!!! lol. im paranoid about that kind of stuff.

 

Sorry, the only pics I have were of the parts resting on the seat. No detailed installed pics that you are seeking, best of luck.

Bryce

 

You need to have the car in the air anyway to drill the holes in the trans tunnel for the lap belt because you have to install a backing plate for the eye bolt to thread into. At least if you want to be legit about it. I measured directly across from the other lap bolt and drilled right through into the trans tunnel.

 

This thread has tons of useful information I believe you are looking for.

https://my350z.com/forum/exterior-an...-question.html

And this is the backing plate I used.

http://www.sparcousa.com/pharness_comp.asp?id=479