FINAL OFFER on Modified Z
07-31-2008, 03:38 AM
#1
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: King George, VA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
FINAL OFFER on Modified Z
2003 350Z
I am only selling this due to having a baby on the wayBrickyard Red
Enthusiast Edition with front, side, and curtain airbags
54K original owner miles on chassis
3.5K break in miles on built motor
15K on 2005 Transmission model 008
$17,500
Phone#: 540-775-1388
I live in King George, VA
and work in LaPlata, MD
DRIVETRAIN:
· Built by Bob Hamilton in Delaware (using the most up to date machining equipment available and on display at the 2006 SEMA show).
· Arias Extreme Duty 9:1 pistons
· Pauter Rods
· Nismo High Flow oil pump
·½” ARP head studs (Block and head was CNC machine honed and drilled, not from template which is commonly done)
· Coolant bypass modification (allows extra coolant to the back side of cylinders utilizing the OEM Pathfinder coolant duct.)
· 5 angle valve job
· Heads were ported and polished
· Jim Wolfe lightened flywheel which was used while balancing the crank.
· 2005 model 008 Transmission (the first good one)
· Full CJM STAGE 2 fuel return system with larger return lines, new fuel rails, and Aeromotive regulator.
· RC 650 injectors with spacers and clips
· UTEC Parallel Engine Management System which allows full control over Fuel and Ignition Timing. Each control gives you 250 rpm resolution from 500 rpm to rev-limit with over 10 different load sites.
· DTEC-MAP is a plug-in manifold absolute pressure sensor that allows the DTEC to measure and data log boost pressures.
· Map Switch which allows you to switch between 5 different maps on the fly.
FOR LOOKS & TRACTION:
Stock wheels and tires· Hawk brake pads for the rear used approximately 5K miles
· Nismo style rear spoiler
· 30% tint side and rear
· blue neons under the dash with hidden switch
· Rear view camera in the rear license plate.
Sound:
· Kenwood DDX touch screen DVD player
· 3 Rockford power series amps total of around 1500 watts
· Alpine 6.5” type S two ways in the front door
· JL XR 653 3 way component speaker in the rear
· 2 JL 10” W6 V2
· Molded fiberglass section to house four components and the two 10” subs. This section covers the gap between the front seat and the rear interior sway bar where the amps are housed. It is currently covered in black vinyl and blends into the cars interior very well. This could also be removed and the section could be painted.
· 1 JL 12” W6 which is hidden behind the drivers seat.
· All enclosures were made to JL recommended specs.
· All of the weight of the amps and subs are located over the rear axle.
· A lighter alternative to Dynamat was used for sound deadening on almost every panel in the car.
The only negatives to the car are that the front bumber has some peppering, there are a few minor scratches in the paint, and the rear AC line needs to be replaced.
__________________
Last edited by ILLBZNU; 08-12-2008 at 06:07 AM.
07-31-2008, 04:18 AM
#3
Registered User
iTrader: (4)
Join Date: Nov 2006
Location: towson
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
very nice ride man...dont sell dont sell!!! i was facing the same problem so i searched on craigslist and picked up a nice jeep cherekee for 2300...get yourself a little reliable 4 seater "beater" and keep the z!!youll regret selling it!! i felt bad when i had people come look at mine that were interested!
07-31-2008, 07:54 AM
#7
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: King George, VA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
#s
Originally Posted by tywinter
Nice looking car...I like the color
What kind of dyno numbers and track times with the build?
What kind of dyno numbers and track times with the build?
Trending Topics
07-31-2008, 09:34 AM
#9
Exactly why I bought a G!
Exactly..
plus one on a great car and an unbelievable price....if only I had 400 a month...but then again....I have a baby on the way also...due Oct. 16th.
CONGRATS on the BABY Man...its an awesome feeling after you get the "freaking out because youre a parent" wears off...lol.
Congrats...someone pick this up quick!
Exactly..
plus one on a great car and an unbelievable price....if only I had 400 a month...but then again....I have a baby on the way also...due Oct. 16th.
CONGRATS on the BABY Man...its an awesome feeling after you get the "freaking out because youre a parent" wears off...lol.
Congrats...someone pick this up quick!
07-31-2008, 07:42 PM
#11
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: King George, VA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
head rests included
Originally Posted by rockinbboy
I hope it comes with head rests...
Yes head rests included.
I took them off so the custom fiberglass work would show up better in the photo. I took about 100 hours of labor and a Divorce with my first wife to create, so I thought I'd try to show it off a bit!
Last edited by ILLBZNU; 08-04-2008 at 03:03 AM.
08-03-2008, 03:48 PM
#13
Registered User
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: King George, VA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
bump
I just sold the wheels and the Stock 18s will be going back on with stock tires on.
New Price = $17,500
New Price = $17,500
Last edited by ILLBZNU; 08-13-2008 at 08:54 AM.
