Should I be nervous? Friend bought mods...
My friend has a 2000 Celica GT-S with 48,000 miles on it now (only 5000 on engine - Looong story) and he currently has an AEM inake and a TRD exhaust on it. He has been to the track on many occasions running a personal best of 15.4@92.7MPH and usually runs Between 15.6-15.8@91-92MPH consistantly.
Now since I got my Z he has got a serious case of "keeping up with the Jones's" and has ordered the following mods, I might of missed one but o well:
-AEM Headers
-Short Throw Shift Kit
-Racing clutch kit
-Unortho Alum Flywheel
-Unortho Underdrive pulley
8mm Magnacore wires and plat-4 plugs (no biggie)
** ALL TO BE INSTALLED IN ABOUT A WEEK
He will be running on his Stock 16's wheels
He plans to dyno before and after mods also.. Any guesses as to what he might be running with these mods and how much HP you think he would gain? Truthfully I don't think I have much to worry about, but I think he should be running at least into the upper 14's? What do you all think?
Now since I got my Z he has got a serious case of "keeping up with the Jones's" and has ordered the following mods, I might of missed one but o well:
-AEM Headers
-Short Throw Shift Kit
-Racing clutch kit
-Unortho Alum Flywheel
-Unortho Underdrive pulley
8mm Magnacore wires and plat-4 plugs (no biggie)
** ALL TO BE INSTALLED IN ABOUT A WEEK
He will be running on his Stock 16's wheels
He plans to dyno before and after mods also.. Any guesses as to what he might be running with these mods and how much HP you think he would gain? Truthfully I don't think I have much to worry about, but I think he should be running at least into the upper 14's? What do you all think?
Last edited by Daytona Blue Z in Bo; Feb 14, 2003 at 08:50 AM.
Absolutely nothing to worry about on the drag strip. If he plays his cards right he's lucky to get 14.8-14.9. If you can drive, you'll be in the high 13's stock, and getting even better as your Z breaks-in over time.
Add those mods to the Z, plus a (hopefully) upcoming ECU and he'll forget what the front & side of your car looks like.
Add those mods to the Z, plus a (hopefully) upcoming ECU and he'll forget what the front & side of your car looks like.
Originally posted by stx
Not a chance with those mods. He will need a miracle.
Not a chance with those mods. He will need a miracle.
Trending Topics
Well the parts are totalling close to $3,000 and the installation of those parts (the ones were not doing ourselves) will be like an additional $1,000. I think he will be happy if he can just do consistant runs into the 14's.. But I think he was hoping for more than 20HP.. His intake/Exhaust already gave him nearly 20 rwHP. But it will be worth it if he can run consistantly between 14.8-15.0. Thats very competitive at the track since the average 1/4 run on street night is about 15.7@91.
Originally posted by Daytona Blue Z in Bo
My friend has a 2000 Celica GT-S with 48,000 miles on it now (only 5000 on engine - Looong story) and he currently has an AEM inake and a TRD exhaust on it. He has been to the track on many occasions running a personal best of 15.4@92.7MPH and usually runs Between 15.6-15.8@91-92MPH consistantly.
Now since I got my Z he has got a serious case of "keeping up with the Jones's" and has ordered the following mods, I might of missed one but o well:
-AEM Headers
-Short Throw Shift Kit
-Racing clutch kit
-Unortho Alum Flywheel
-Unortho Underdrive pulley
8mm Magnacore wires and plat-4 plugs (no biggie)
** ALL TO BE INSTALLED IN ABOUT A WEEK
He will be running on his Stock 16's wheels
He plans to dyno before and after mods also.. Any guesses as to what he might be running with these mods and how much HP you think he would gain? Truthfully I don't think I have much to worry about, but I think he should be running at least into the upper 14's? What do you all think?
My friend has a 2000 Celica GT-S with 48,000 miles on it now (only 5000 on engine - Looong story) and he currently has an AEM inake and a TRD exhaust on it. He has been to the track on many occasions running a personal best of 15.4@92.7MPH and usually runs Between 15.6-15.8@91-92MPH consistantly.
Now since I got my Z he has got a serious case of "keeping up with the Jones's" and has ordered the following mods, I might of missed one but o well:
-AEM Headers
-Short Throw Shift Kit
-Racing clutch kit
-Unortho Alum Flywheel
-Unortho Underdrive pulley
8mm Magnacore wires and plat-4 plugs (no biggie)
** ALL TO BE INSTALLED IN ABOUT A WEEK
He will be running on his Stock 16's wheels
He plans to dyno before and after mods also.. Any guesses as to what he might be running with these mods and how much HP you think he would gain? Truthfully I don't think I have much to worry about, but I think he should be running at least into the upper 14's? What do you all think?
Originally posted by Hedonist
Heh, a Celica GT-S is the turbo Celica... and he bought a header for it? haha...
Heh, a Celica GT-S is the turbo Celica... and he bought a header for it? haha...
LOL- My friend is scared of nothing in that car, he has already blown an engine and a tranny.. The redline is at 7800 and rev limiter comes on at about 8350 or so.. And I'll be damned if I ever see him shift under 8349RPMs on the road or the track. I think he needs to try some new launch techniques but his about best of 15.4@92.7 was actually achieved with a messed up tranny, it would grind HARD from 2nd - 3rd and bog the car down. In the offseason with a full new tranny and engine and more mods he should do nicely.
OK, you are right, I am an idiot. The old Celica GTS denoted a turbo, and for some reason, I thought the newer ones came with one too. So yes, a header will fit. 
But no, you need not worry about your friend in the GTS unless he spends a good deal of money tuning his fuel mapping and has an LSD to keep that power to the ground.

But no, you need not worry about your friend in the GTS unless he spends a good deal of money tuning his fuel mapping and has an LSD to keep that power to the ground.
Originally posted by Daytona Blue Z in Bo
Well the parts are totalling close to $3,000 and the installation of those parts (the ones were not doing ourselves) will be like an additional $1,000. I think he will be happy if he can just do consistant runs into the 14's.. But I think he was hoping for more than 20HP.. His intake/Exhaust already gave him nearly 20 rwHP. But it will be worth it if he can run consistantly between 14.8-15.0. Thats very competitive at the track since the average 1/4 run on street night is about 15.7@91.
Well the parts are totalling close to $3,000 and the installation of those parts (the ones were not doing ourselves) will be like an additional $1,000. I think he will be happy if he can just do consistant runs into the 14's.. But I think he was hoping for more than 20HP.. His intake/Exhaust already gave him nearly 20 rwHP. But it will be worth it if he can run consistantly between 14.8-15.0. Thats very competitive at the track since the average 1/4 run on street night is about 15.7@91.
lol what kind of cars run at your track???
Originally posted by Daytona Blue Z in Bo
His intake/Exhaust already gave him nearly 20 rwHP.
His intake/Exhaust already gave him nearly 20 rwHP.

(sorry, couldn't stop myself)
Originally posted by MannishBoy
Hah, that's pretty impressive. Increasing the rear wheel hp on a 2000 Celica? I thought they quit making the All Tracs
(sorry, couldn't stop myself)
Hah, that's pretty impressive. Increasing the rear wheel hp on a 2000 Celica? I thought they quit making the All Tracs

(sorry, couldn't stop myself)
.
Originally posted by Daytona Blue Z in Bo
Well the parts are totalling close to $3,000 and the installation of those parts (the ones were not doing ourselves) will be like an additional $1,000. I think he will be happy if he can just do consistant runs into the 14's.. But I think he was hoping for more than 20HP.. His intake/Exhaust already gave him nearly 20 rwHP. But it will be worth it if he can run consistantly between 14.8-15.0. Thats very competitive at the track since the average 1/4 run on street night is about 15.7@91.
Well the parts are totalling close to $3,000 and the installation of those parts (the ones were not doing ourselves) will be like an additional $1,000. I think he will be happy if he can just do consistant runs into the 14's.. But I think he was hoping for more than 20HP.. His intake/Exhaust already gave him nearly 20 rwHP. But it will be worth it if he can run consistantly between 14.8-15.0. Thats very competitive at the track since the average 1/4 run on street night is about 15.7@91.
P.S
Oh, and by the way AEM dont even make headers. So its going to be hard for him to install that HEADER(only one)
LOL. rwHP .. hehehe.. so funny - people with there wise nit picking comments
And I checked with him, its not an AEM set of HEADERS- all he knows is there being shipped from Japan and there for his car.. I just assumed it was AEM since most of the stuff he gets is.
They actually have a Dyno chart on the AEM site that shows 18 more HP with the intake on a GTS - he dyno'ed it after he installed that and a cat-back and showed just over 20 fwHP gain..
Well I was saying the average is about 15.7 at the track.. Thats concidering 150+ cars on a giving night. Minivans, trucks all the rice-a-ronis with intake-exhaust civics, accords running 17's and the vipers and the modded camaros, supra's, RX7's, DSM's cobra's, vette's running 12-14's.. Then the middle of the pack in the 15's you got your VW's, some stangs, probe V6's integera's, most VTEC'ers, seriously modded neons..
There's a huge variety, I remember the first time me or my friend ran a drag, we were still in highschool at the time and my friend had a 1996 Toyota Tercel 4MT (new at the time) and he decided to race at the time for fun. I had it on video, he got matched up with a SC's Camaro SS that ran an 11.5 in the 1/4 miles, i could barly keep them in frame with the camera.. He ran a respectful 17.4@80 with a bone stock tercel LOL
Quote from my friend after that race:
"All I remember is looking over and seening somebody with a helmet on and I thought, O boy am I gonna look stupid"
And I checked with him, its not an AEM set of HEADERS- all he knows is there being shipped from Japan and there for his car.. I just assumed it was AEM since most of the stuff he gets is.They actually have a Dyno chart on the AEM site that shows 18 more HP with the intake on a GTS - he dyno'ed it after he installed that and a cat-back and showed just over 20 fwHP gain..
Well I was saying the average is about 15.7 at the track.. Thats concidering 150+ cars on a giving night. Minivans, trucks all the rice-a-ronis with intake-exhaust civics, accords running 17's and the vipers and the modded camaros, supra's, RX7's, DSM's cobra's, vette's running 12-14's.. Then the middle of the pack in the 15's you got your VW's, some stangs, probe V6's integera's, most VTEC'ers, seriously modded neons..
There's a huge variety, I remember the first time me or my friend ran a drag, we were still in highschool at the time and my friend had a 1996 Toyota Tercel 4MT (new at the time) and he decided to race at the time for fun. I had it on video, he got matched up with a SC's Camaro SS that ran an 11.5 in the 1/4 miles, i could barly keep them in frame with the camera.. He ran a respectful 17.4@80 with a bone stock tercel LOL
Quote from my friend after that race:
"All I remember is looking over and seening somebody with a helmet on and I thought, O boy am I gonna look stupid"
Last edited by Daytona Blue Z in Bo; Feb 15, 2003 at 05:21 AM.



