New 350z owner!
01-02-2012, 06:08 AM
#21
Living in 350Z
iTrader: (30)
Join Date: May 2009
Location: Spartanburg(SparkleCity), SC
Posts: 4,293
Likes: 0
Received 2 Likes
on
2 Posts
Like they said above, search is definitely your friend on here. I'm surprised that davidv hasn't already come in and offered $20 if you can ask an original question. 
Sounds like you're interested in doing some mods to your new Z, so I wish you luck. There is a wealth of info on here and plenty of folks that have been there, done it, and learned lessons along the way. Purely a heads up - but it's worth searching and learning from their experiences/mistakes before asking the same question that's been asked a zillion times before. The newbs are sometimes given the benefit of the doubt with helpful advice, and they are sometimes fed to the wolves if they don't do a bit of work searching on their own first.
IMO, it's a great community of folks to share & learn from - glad to see you're one of the new family members!
Sounds like you're interested in doing some mods to your new Z, so I wish you luck. There is a wealth of info on here and plenty of folks that have been there, done it, and learned lessons along the way. Purely a heads up - but it's worth searching and learning from their experiences/mistakes before asking the same question that's been asked a zillion times before. The newbs are sometimes given the benefit of the doubt with helpful advice, and they are sometimes fed to the wolves if they don't do a bit of work searching on their own first.
IMO, it's a great community of folks to share & learn from - glad to see you're one of the new family members!
01-02-2012, 08:35 PM
#22
Registered User
Thread Starter
Join Date: Nov 2011
Location: Fremont, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Like they said above, search is definitely your friend on here. I'm surprised that davidv hasn't already come in and offered $20 if you can ask an original question.
Sounds like you're interested in doing some mods to your new Z, so I wish you luck. There is a wealth of info on here and plenty of folks that have been there, done it, and learned lessons along the way. Purely a heads up - but it's worth searching and learning from their experiences/mistakes before asking the same question that's been asked a zillion times before. The newbs are sometimes given the benefit of the doubt with helpful advice, and they are sometimes fed to the wolves if they don't do a bit of work searching on their own first.
IMO, it's a great community of folks to share & learn from - glad to see you're one of the new family members!
Sounds like you're interested in doing some mods to your new Z, so I wish you luck. There is a wealth of info on here and plenty of folks that have been there, done it, and learned lessons along the way. Purely a heads up - but it's worth searching and learning from their experiences/mistakes before asking the same question that's been asked a zillion times before. The newbs are sometimes given the benefit of the doubt with helpful advice, and they are sometimes fed to the wolves if they don't do a bit of work searching on their own first.
IMO, it's a great community of folks to share & learn from - glad to see you're one of the new family members!
02-20-2012, 07:18 PM
#23
Registered User
Thread Starter
Join Date: Nov 2011
Location: Fremont, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Just got the stance gr OEM coilovers yesterday and now i need camber arms. Im not sure which rear camber arm i really need for the rear so i can get more life on my tires. Advice and comments will be appreciated!
02-21-2012, 02:56 PM
#24
Living in 350Z
iTrader: (30)
Join Date: May 2009
Location: Spartanburg(SparkleCity), SC
Posts: 4,293
Likes: 0
Received 2 Likes
on
2 Posts
I like the Kinetix rear camber arms for the money. Just make sure that you also get the SPL lock out washers & bolts.
The SPL Pro camber arms are baller status. I've bent a few of the Eibach/SPC arms from sliding around, so I stepped up to the Kinetix.
The SPL Pro camber arms are baller status. I've bent a few of the Eibach/SPC arms from sliding around, so I stepped up to the Kinetix.
02-21-2012, 06:30 PM
#25
Registered User
Thread Starter
Join Date: Nov 2011
Location: Fremont, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
How you like the spc arms? I might get it at ebay..lol
Thread
Thread Starter
Forum
Replies
Last Post
Workshop12
Exterior & Interior
256
03-23-2020 01:45 PM
