Need help on budget exhaust setups on HR
Thread Starter
Registered User
Joined: Feb 2018
Posts: 3
Likes: 0
From: Modesto CA
Need help on budget exhaust setups on HR
Looking to spend a good $900 at most for my 07 350z HR!!'
I have a few setups in mind!
(Keep in mind I'm not looking to throw on any headers or testpipes atm, currently looking for something decent and not too raspy)
*my current setup is a Spec D Tuning exhaust with a magnaflow 2.5 dual in-outlet resonator, but needs to be replaced as it has leaks from welding and I decided I'm just gonna start from scratch with a new setup
1. ISR Single Exit Exhaust + Motordyne XYZ pipe (w/ resonator attachment)
(This exhaust is something I could honestly do, I don't know if anyone has but if someone has, let me know how that turns out! I do know that the ISR already comes prepackaged with the midpipe and resonator but would attaching that piece to the XYZ resonator cause any air flow restriction?
2. Agency Power + Motordyne XYZ pipe (w/ resonator)
(This exhaust is going a tad bit over my budget but oh well.. just like the first option, I'm not sure if anyone has done this.
3. Tomei + XYZ pipe
4. Above exhausts w/ HR stock Y-Pipe
(This seems to be a last resort out of the three single exits..)
5. Invidia Gemini
(Full-setup, considering this if someone convinces me otherwise not to go with the single exit exhaust and try something different)
6. **** my budget and get a Motordyne shockwave
(This one's self explanatory.. as good as they are, this actually is my TRUE last resort..)
I'd love some suggestions!!! Like I said, I'm not really looking into installing test pipes or anything like that, as I live in California and I'm not trying to throw on any codes on my car
Thank you guys!!!
I have a few setups in mind!
(Keep in mind I'm not looking to throw on any headers or testpipes atm, currently looking for something decent and not too raspy)
*my current setup is a Spec D Tuning exhaust with a magnaflow 2.5 dual in-outlet resonator, but needs to be replaced as it has leaks from welding and I decided I'm just gonna start from scratch with a new setup
1. ISR Single Exit Exhaust + Motordyne XYZ pipe (w/ resonator attachment)
(This exhaust is something I could honestly do, I don't know if anyone has but if someone has, let me know how that turns out! I do know that the ISR already comes prepackaged with the midpipe and resonator but would attaching that piece to the XYZ resonator cause any air flow restriction?
2. Agency Power + Motordyne XYZ pipe (w/ resonator)
(This exhaust is going a tad bit over my budget but oh well.. just like the first option, I'm not sure if anyone has done this.
3. Tomei + XYZ pipe
4. Above exhausts w/ HR stock Y-Pipe
(This seems to be a last resort out of the three single exits..)
5. Invidia Gemini
(Full-setup, considering this if someone convinces me otherwise not to go with the single exit exhaust and try something different)
6. **** my budget and get a Motordyne shockwave
(This one's self explanatory.. as good as they are, this actually is my TRUE last resort..)
I'd love some suggestions!!! Like I said, I'm not really looking into installing test pipes or anything like that, as I live in California and I'm not trying to throw on any codes on my car
Thank you guys!!!
Last edited by Ryandutt98; Mar 12, 2018 at 01:49 AM. Reason: Typo
Registered User
Joined: Mar 2016
Posts: 1,220
Likes: 289
From: South Carolina
I'd save your money for a full Motordyne TDX2 with XYZ pipe (I'm bias since I love my MD setup) or the Tomei+XYZ pipe.
On a side note, eff California and it's tree hugging smog/emissions restrictions.
On a side note, eff California and it's tree hugging smog/emissions restrictions.
Thread
Thread Starter
Forum
Replies
Last Post