Notices
NISMO 350Z The Limited Edition Best Handling Z Ever.

Ouch! Clear Bra Cost for Nismo

Thread Tools
 
Search this Thread
 
Old Sep 18, 2007 | 12:25 PM
  #1  
ColoradoClark's Avatar
ColoradoClark
Thread Starter
Registered User
iTrader: (3)
 
Joined: Apr 2006
Posts: 360
Likes: 0
From: Colorado
Default Ouch! Clear Bra Cost for Nismo

One of the local tint/bra shops in Denver (IDS for you locals) just quoted me $800 for a clear bra install. 24" up the hood and fenders, including lights, mirrors and the front bumper/lip.

I hate to spend that much money, but I've already got two small chips on the front lip and a really small nick about 2/3 of the way up the hood with only 1600 miles on the car. FYI: the hood nick would be above the bra with a 24" installation. The shop said they couldn't do a full hood wrap with 3M material, as the widest product that they could get was 48", which is less than the length of the hood.

When I asked how much it would be to do just the bumper/lip, the guy said $375 -- which I can understand, given the custom work that the installation would entail.

Anybody else gotten a quote for clear bra installation for their Nismo??
Reply
Old Sep 18, 2007 | 12:30 PM
  #2  
SOLO-350Z's Avatar
SOLO-350Z
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default

Too much. It normally costs $550-600.
Reply
Old Sep 18, 2007 | 01:06 PM
  #3  
ColoradoClark's Avatar
ColoradoClark
Thread Starter
Registered User
iTrader: (3)
 
Joined: Apr 2006
Posts: 360
Likes: 0
From: Colorado
Default

Originally Posted by SOLO-350Z
Too much. It normally costs $550-600.
For a regular Z that is true -- I think its the front bumper that is causing them to quote so high.
Reply
Old Sep 18, 2007 | 01:19 PM
  #4  
SOLO-350Z's Avatar
SOLO-350Z
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default

Mine was done.
Reply
Old Sep 18, 2007 | 02:14 PM
  #5  
jmark's Avatar
jmark
Registered User
iTrader: (1)
 
Joined: Aug 2002
Posts: 3,932
Likes: 2
From: Greer, S.C.
Default

$795 installed is what I was quoted for all 3 kits based on your Xpel pattern Solo-350Z.
Reply
Old Sep 18, 2007 | 02:53 PM
  #6  
Zforever's Avatar
Zforever
Registered User
 
Joined: Aug 2002
Posts: 35
Likes: 0
From: Montville, New Jersey
Default Clear Bra

I just paid $900. for my Nismo #228. Rt 59 New York. A lot of money but worth it after my bad experience with my '03 Track ( bubbles, paint cut with blade etc.) This guy did a great job and threw in the gas cap, rear of wheels, door jams. Included hood, bumper and front spoiler plus mirrors. Make sure you check credentials!

Clear Image
www.clearBraYourCar.com
973-207-7000
Reply
Old Sep 18, 2007 | 02:57 PM
  #7  
SOLO-350Z's Avatar
SOLO-350Z
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default

Originally Posted by jmark
$795 installed is what I was quoted for all 3 kits based on your Xpel pattern Solo-350Z.
Well, my bumper was installed by the dealer due to prototype for xpel. I had the hood, fenders, and mirrors installed for $200.
Reply
Old Sep 18, 2007 | 03:56 PM
  #8  
Zforever's Avatar
Zforever
Registered User
 
Joined: Aug 2002
Posts: 35
Likes: 0
From: Montville, New Jersey
Default

Jmark, lucky man!!!
Reply
Old Sep 18, 2007 | 04:27 PM
  #9  
SniperHunter's Avatar
SniperHunter
Registered User
iTrader: (9)
 
Joined: Nov 2005
Posts: 4,080
Likes: 0
From: NYC
Default

Getting bumper, hood, fenders installed for $280, since I'm providing materials.
Reply
Old Sep 18, 2007 | 04:49 PM
  #10  
solemnuz1's Avatar
solemnuz1
Registered User
 
Joined: May 2007
Posts: 25
Likes: 0
From: New Mexico
Default

Well I got mine for free. The dealer didn't go down on the MSRP which was not marked up but he wouldn't go down so he threw in the clear bra, first service and nismo mats for free. The bra would have cost me about $475.00 installed it covered the bumper, lip and about 8" up high in the hood also the back of the side mirrors.

I think the cost they are offering you is too steep, also be very careful of the tech that is installing it. I would go as far as cleaning the car before taking it to the shop (they deep clean it anyways) and taking a high def picture and comparing it with the completed work. Sometimes they will leave areas dirty and if it is noticable enough they will say its a rock chip when it is just dirt.

If they have sample of their work I would definitely take a look at it before trusting them. When I got mine done as me and my friend parked next to the car I couldn't see it I actually had to be standing beside it to even tell that it was there.
Reply
Old Sep 18, 2007 | 07:17 PM
  #11  
rklapper's Avatar
rklapper
Registered User
 
Joined: Aug 2007
Posts: 7
Likes: 0
From: St Louis, MO
Default

$535 from a guy in St Louis. Although I'd seen some of his work before bringing the Z over, I felt much better when I brought the car in to get it done - he was working on someone's Austin Martin Vantage.

Hood (up to the back of the headlights), bumper, front splitter (vertical supports included), sideview mirrors and door edges.
Reply
Old Sep 18, 2007 | 07:26 PM
  #12  
redmike_02's Avatar
redmike_02
Registered User
iTrader: (15)
 
Joined: Apr 2005
Posts: 572
Likes: 0
From: Harrison, Ohio
Default

You should have had the spray on kind put on when you had it painted. It would have been cheeper. Good luck man. Seems like a lot.
Reply
Old Sep 19, 2007 | 02:41 AM
  #13  
jmark's Avatar
jmark
Registered User
iTrader: (1)
 
Joined: Aug 2002
Posts: 3,932
Likes: 2
From: Greer, S.C.
Default

Originally Posted by jmark
$795 installed is what I was quoted for all 3 kits based on your Xpel pattern Solo-350Z.
My problem is no one local will do the kit. My best price so far is $625 installed & $170 to come to me.
Reply
Old Sep 19, 2007 | 03:58 AM
  #14  
azula's Avatar
azula
Registered User
iTrader: (12)
 
Joined: May 2006
Posts: 4,216
Likes: 0
From: Ft. Lauderdale, FL
Default

the bra is more expensive because there is no precut version for that bumper. i had to pay extra for my V1 nismo bumper to be covered. but 800 bucks? you could get ur bumper repainted twice for that amount....good luck though...
Reply
Old Sep 19, 2007 | 04:11 AM
  #15  
SOLO-350Z's Avatar
SOLO-350Z
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default

There is a precut now.
Reply
Old Sep 19, 2007 | 04:14 AM
  #16  
jmark's Avatar
jmark
Registered User
iTrader: (1)
 
Joined: Aug 2002
Posts: 3,932
Likes: 2
From: Greer, S.C.
Default

Originally Posted by azula
the bra is more expensive because there is no precut version for that bumper. i had to pay extra for my V1 nismo bumper to be covered. but 800 bucks? you could get ur bumper repainted twice for that amount....good luck though...
Wrong. Solo-350z's car was used for the pattern.

https://www.xpel.com/products/paint_...&submodel=5368
Reply
Old Sep 19, 2007 | 06:45 AM
  #17  
TacoMadre's Avatar
TacoMadre
Registered User
iTrader: (4)
 
Joined: Dec 2004
Posts: 1,631
Likes: 0
From: TX
Default

Mine was free
Reply
Old Sep 19, 2007 | 06:54 AM
  #18  
ColoradoClark's Avatar
ColoradoClark
Thread Starter
Registered User
iTrader: (3)
 
Joined: Apr 2006
Posts: 360
Likes: 0
From: Colorado
Default

Originally Posted by Arnold K.
Getting bumper, hood, fenders installed for $280, since I'm providing materials.
How much are you paying for the materials -- and what width wrap are you using on the hood?
Reply
Old Sep 19, 2007 | 06:59 AM
  #19  
ColoradoClark's Avatar
ColoradoClark
Thread Starter
Registered User
iTrader: (3)
 
Joined: Apr 2006
Posts: 360
Likes: 0
From: Colorado
Default

Originally Posted by jmark
Wrong. Solo-350z's car was used for the pattern.

https://www.xpel.com/products/paint_...&submodel=5368
Yeah -- and that kit (w/o installation) is over $770. How does that help at all?
Reply
Old Sep 19, 2007 | 07:19 AM
  #20  
jmark's Avatar
jmark
Registered User
iTrader: (1)
 
Joined: Aug 2002
Posts: 3,932
Likes: 2
From: Greer, S.C.
Default

Originally Posted by ColoradoClark
Yeah -- and that kit (w/o installation) is over $770. How does that help at all?

These are retail kit prices. That is the kits I had quoted for $795 installed. Obviously the installer gets the kits cheap or has them cut out on site and discounts them heavily.
Reply



All times are GMT -8. The time now is 08:19 AM.