Looking for So-Cal Nismo Z to track vs a S2000 CR 11/29 Streets of Willow
10-10-2008, 01:46 PM
#23
Vendor - Former Vendor
Thread Starter
Join Date: Mar 2008
Location: riverside
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
http://www.roadandtrack.com/assets/d...nda-Nissan.pdf
As posted above...
Price: CR
Power: Nismo
Torque: Nismo
Curb Weight: CR
0-60: wash
1/4 mile time: Nismo
1/4 mile ET: Nismo
Braking distance 60-0: CR
Braking distance 80-0: CR
Skidpad: CR
Slalalom: CR
I'd love to see a true "apples to apples" comparison, which I never know will happen...
The CR's brakes will fade before the Nismo's does, and the S2k uses cast rims which weigh more than the Forged pieces on the Nismo.
The Nismo could lose more weight by stripping the sound deadening similar to the CR, and could use some stickier tires from the factory (Dunlops?
)
Gearing is about as agressive as can be reasonable on the CR, the Z could benefit from slightly more agressive gearing, but with that big a power advantage, that's a moot point.
Why couldn't they have made a s2k coupe? That would be a better competitor... everyone compares the Z coupe to the s2k, but shouldn't the Z roadster be the real competitor?
As posted above...
Price: CR
Power: Nismo
Torque: Nismo
Curb Weight: CR
0-60: wash
1/4 mile time: Nismo
1/4 mile ET: Nismo
Braking distance 60-0: CR
Braking distance 80-0: CR
Skidpad: CR
Slalalom: CR
I'd love to see a true "apples to apples" comparison, which I never know will happen...
The CR's brakes will fade before the Nismo's does, and the S2k uses cast rims which weigh more than the Forged pieces on the Nismo.
The Nismo could lose more weight by stripping the sound deadening similar to the CR, and could use some stickier tires from the factory (Dunlops?
)Gearing is about as agressive as can be reasonable on the CR, the Z could benefit from slightly more agressive gearing, but with that big a power advantage, that's a moot point.
Why couldn't they have made a s2k coupe? That would be a better competitor... everyone compares the Z coupe to the s2k, but shouldn't the Z roadster be the real competitor?
10-10-2008, 02:18 PM
#25
Vendor - Former Vendor
Thread Starter
Join Date: Mar 2008
Location: riverside
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
10-11-2008, 07:54 AM
#28
Vendor - Former Vendor
Thread Starter
Join Date: Mar 2008
Location: riverside
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
The opportunity to tell the whole world that the CR is in fact slower than the Nismo if you're faster.
I don't think this has been done under a controller environment outside of magazine testing.
Oh, and a cheap track day with only two run groups.
I don't think this has been done under a controller environment outside of magazine testing.
Oh, and a cheap track day with only two run groups.
10-12-2008, 10:27 AM
#32
Vendor - Former Vendor
Thread Starter
Join Date: Mar 2008
Location: riverside
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Sure, do you want to sponsor paying for the track + staff + prizes? 
I sure as hell can't afford it.
And given that every other CR owner I know tracks regularly, I don't know if that'd be a good idea...
Most of them have quite a few go-fast mods that don't involve power...
I sure as hell can't afford it.
And given that every other CR owner I know tracks regularly, I don't know if that'd be a good idea...
Most of them have quite a few go-fast mods that don't involve power...
10-12-2008, 05:14 PM
#33
Sponsor
Works Concepts
Works Concepts
It makes for a fun argument, but on the track, the only thing truly being compared is the drivers.
A stock 350Z could beat a CR around a track and vice versa, but that won't tell you which car is faster.
A stock 350Z could beat a CR around a track and vice versa, but that won't tell you which car is faster.
10-14-2008, 08:39 PM
#36
Registered User
Join Date: Dec 2003
Location: Houston
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
yea, i agree. it is a drivers race, but i dont think any z owner isnt gonna not be holding his or her breath for the result, i know i will. the only thing that made me opt for the nismo is the fact that it is a much more comfortable fit for me inside, and should i want to, i can strip the car down further or add more power for far easier than the s2k. i love both cars tho.
10-15-2008, 02:07 AM
#38
Registered User
iTrader: (4)
Join Date: May 2005
Location: So. Cali - Rowland Hts
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
lol fcking mike stirring shiet up in here.. how about a fat *** G versus a NISMO Z
Off Topic: I try to get Mel to get the fail dude with the NISMO Z out but he pussyed out =( I'd like to see how my G does against a Z as well / your CR (Yes I'll be attending R&D's track day)
No my G is NOT TT.. and the list of mods are not updated/somethings have changed
Off Topic: I try to get Mel to get the fail dude with the NISMO Z out but he pussyed out =( I'd like to see how my G does against a Z as well / your CR (Yes I'll be attending R&D's track day)
No my G is NOT TT.. and the list of mods are not updated/somethings have changed
10-15-2008, 10:47 AM
#39
Vendor - Former Vendor
Thread Starter
Join Date: Mar 2008
Location: riverside
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Gotta keep these Z boys on their toes
FWIW, I really want to get an apples to apples comparison. I've held off on putting my brakes on in hopes of finding a stock Nismo Z to run with. If I get a Nismo Z with bolt-ons, then I will have bolt-ons as well.
Borrowed Amune R1 Titan... 55lbs weight reduction
headers... 35 lb weight reduction...
Borrowed Enkei RPF1's... 7 lb reduction per corner...
Car will be stock down to the tire EXCEPT for the clutch/flywheel (which technically is a performance LOSS on my car; I fall out of VTEC on a 1-2 shift, whereas a stock setup does not)
FWIW, I really want to get an apples to apples comparison. I've held off on putting my brakes on in hopes of finding a stock Nismo Z to run with. If I get a Nismo Z with bolt-ons, then I will have bolt-ons as well.
Borrowed Amune R1 Titan... 55lbs weight reduction
headers... 35 lb weight reduction...
Borrowed Enkei RPF1's... 7 lb reduction per corner...
Car will be stock down to the tire EXCEPT for the clutch/flywheel (which technically is a performance LOSS on my car; I fall out of VTEC on a 1-2 shift, whereas a stock setup does not)
Last edited by Mike@RiversideInfiniti; 10-15-2008 at 10:50 AM.