Service Engine Soon @ 860 miles???
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
My "SERVICE ENGINE SOON" lighted up when I had only 860miles on my ODOMETER, is this NORMAL??? 


I thought that this light will normally come up when is near to 3750miles for the first SERVICE & MAINTENANCE. Can anyone help me out here?
Thanks in advance!!!

I thought that this light will normally come up when is near to 3750miles for the first SERVICE & MAINTENANCE. Can anyone help me out here?
Thanks in advance!!!
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
Nismo133, thanks for your reply. Main problem now is that NISSAN Paraguay won't take care of any vehicles that are not imported by them.... this really SUCKSSSS!!! Is there any other way to check the code or anything I can do about it?
Well, the truth is that this light came up after I started the engine without connecting both of the AIR SENSOR on the pipes. I also noticed the TSC/SLIP light came up as well, so I STOP the engine immediately. After this, I found out the driver's sensor was not connected so I did connect it immediately. Following this, the SERVICE ENGINE SOON light come up...
Could it possible be that when I started the engine without connecting the AIR SENSOR correctly and caused some malfunction there or anything like that? Maybe some dirt got into and causing this problem now???
Well, the truth is that this light came up after I started the engine without connecting both of the AIR SENSOR on the pipes. I also noticed the TSC/SLIP light came up as well, so I STOP the engine immediately. After this, I found out the driver's sensor was not connected so I did connect it immediately. Following this, the SERVICE ENGINE SOON light come up...

Could it possible be that when I started the engine without connecting the AIR SENSOR correctly and caused some malfunction there or anything like that? Maybe some dirt got into and causing this problem now???
Last edited by kennylin888; Dec 22, 2008 at 08:06 PM. Reason: Attach pics
Most likely caused by starting the car without the sensors plugged in correctly. Use the Technosquare ECU reset procedure and don't worry about it unless the light comes on again. If it comes on again, get an OBDII scan tool to find out what code it's thrown and then post up again.
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
Most likely caused by starting the car without the sensors plugged in correctly. Use the Technosquare ECU reset procedure and don't worry about it unless the light comes on again. If it comes on again, get an OBDII scan tool to find out what code it's thrown and then post up again.
Trending Topics
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
Best of luck
Last edited by cdoxp800; Dec 23, 2008 at 06:12 PM.
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
learn this , print this, post this on the wall, have it in the car, dream about this !!!
http://www.technosquareinc.com/350reset.htm
http://www.technosquareinc.com/350reset.htm
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
learn this , print this, post this on the wall, have it in the car, dream about this !!!
http://www.technosquareinc.com/350reset.htm
http://www.technosquareinc.com/350reset.htm
WILL DO!!!By the way, in the previous posts PACFWU already suggested me doing this.
"Most likely caused by starting the car without the sensors plugged in correctly. Use the Technosquare ECU reset procedure and don't worry about it unless the light comes on again. If it comes on again, get an OBDII scan tool to find out what code it's thrown and then post up again.
__________________
"FACTORY" //Silver Alloy Nismo #549"
But still, really appreciate for your time dropping by and giving me some constructive reply to my inquiry. Now, problem solved by disconnecting and connecting back the battery after few mins.
Thanks TAC-M, wish you & ur family a very MERRY X-mas & GREAT NEW YEAR!!!

oh, and you just lost power, thanks to that HOT AIR INTAKE !!!
and MERRY X-mass to you as well ! and a SUPER FUN and HAPPY NEW YEAR !!!!
don't get mad at my comment's, i only speak the truth....
STOCK or new INJEN – the one that sits in the bumper are good. The rest - NOT GOOD !
and MERRY X-mass to you as well ! and a SUPER FUN and HAPPY NEW YEAR !!!!
don't get mad at my comment's, i only speak the truth....
STOCK or new INJEN – the one that sits in the bumper are good. The rest - NOT GOOD !
Last edited by Tac-M; Dec 24, 2008 at 12:39 PM.
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2007
Posts: 340
Likes: 1
From: Asuncion, Paraguay - S.America
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM





