Notices
NISMO 350Z The Limited Edition Best Handling Z Ever.

Pictures of Aftermarket "OEM Styled" Exhausts?

Thread Tools
 
Search this Thread
 
Old Aug 17, 2009 | 04:06 PM
  #1  
Nismo1534's Avatar
Nismo1534
Thread Starter
Registered User
iTrader: (15)
 
Joined: Apr 2009
Posts: 605
Likes: 1
From: Oregon
Default Pictures of Aftermarket "OEM Styled" Exhausts?

I've noticed that there isn't much in terms of photos or videos of aftermarket exhausts - installed on Nismos - that resemble the look of the factory Nismo muffler.

From some quick searching, I can find exhausts such as the S-tuned Nismo, Invidia G200, Borla, Bassani, Stillen, and Motordyne VQ that somewhat resemble the look of the factory muffler, but it's impossible to tell how they will look with the Nismo rear bumper. You can find tons of pics of any exhaust installed on a standard Z, but not so much on the Nismo.

I typically run into pictures of Nismos with single-exit cans or the HKS Hi-Power, but nothing clean and tucked like that of the stock muffler.

With that said, does anyone have photos of Nismos with OEM-looking aftermarket exhausts?

Thanks
Nismo1534
Reply
Old Aug 17, 2009 | 05:51 PM
  #2  
StoneZtech's Avatar
StoneZtech
Registered User
iTrader: (12)
 
Joined: Oct 2007
Posts: 333
Likes: 0
From: Maryland
Default

Just keep your NISMO 350z muffler, have a good shop run an custom pipe setup for you. Also you can get NISMO mid and Y-pipe and have your shop customize it for the NISMO muffler so it fits.

That way you keep the stock NISMO look.


Originally Posted by Nismo1534
I've noticed that there isn't much in terms of photos or videos of aftermarket exhausts - installed on Nismos - that resemble the look of the factory Nismo muffler.

From some quick searching, I can find exhausts such as the S-tuned Nismo, Invidia G200, Borla, Bassani, Stillen, and Motordyne VQ that somewhat resemble the look of the factory muffler, but it's impossible to tell how they will look with the Nismo rear bumper. You can find tons of pics of any exhaust installed on a standard Z, but not so much on the Nismo.

I typically run into pictures of Nismos with single-exit cans or the HKS Hi-Power, but nothing clean and tucked like that of the stock muffler.

With that said, does anyone have photos of Nismos with OEM-looking aftermarket exhausts?

Thanks
Nismo1534
Reply
Old Aug 18, 2009 | 04:06 PM
  #3  
Nismo1534's Avatar
Nismo1534
Thread Starter
Registered User
iTrader: (15)
 
Joined: Apr 2009
Posts: 605
Likes: 1
From: Oregon
Default

Originally Posted by StoneZtech
Just keep your NISMO 350z muffler, have a good shop run an custom pipe setup for you. Also you can get NISMO mid and Y-pipe and have your shop customize it for the NISMO muffler so it fits.

That way you keep the stock NISMO look.
OK, I'll keep that in mind. Does anyone have pics to share showing bolt-on factory styled exhausts?
Reply
Old Aug 18, 2009 | 04:19 PM
  #4  
Z1 Performance's Avatar
Z1 Performance
Former Sponsor
iTrader: (564)
 
Joined: Feb 2003
Posts: 19,266
Likes: 5
From: Long Island, New York
Default

because most exhausts are not designed with the NISMO bumper in mind, and are too short
Reply
Old Aug 20, 2009 | 03:48 PM
  #5  
Nismo1534's Avatar
Nismo1534
Thread Starter
Registered User
iTrader: (15)
 
Joined: Apr 2009
Posts: 605
Likes: 1
From: Oregon
Default

Originally Posted by Z1 Performance
because most exhausts are not designed with the NISMO bumper in mind, and are too short
Hmmmm, well that's frustrating. So no one puts these types of exhausts on their Nismos? I'd think there would be at least a few members with photos....
Reply
Old Aug 20, 2009 | 06:28 PM
  #6  
biggersNISMO's Avatar
biggersNISMO
Registered User
iTrader: (7)
 
Joined: Aug 2008
Posts: 551
Likes: 1
From: South Indianapolis
Default

My motordyne looks pretty nice.... and sounds nice....

http://videos.streetfire.net/video/M...50z_689187.htm
Reply
Old Aug 21, 2009 | 03:55 AM
  #7  
KingBaby's Avatar
KingBaby
Hardest Setting
Premier Member
iTrader: (3)
 
Joined: Feb 2008
Posts: 13,406
Likes: 130
From: MexiCali dodging potholes
Default

Yes...

been looking for one...thanks

gonna call you right now right now...not later later...
Reply
Old Aug 24, 2009 | 08:29 AM
  #8  
Nismo1534's Avatar
Nismo1534
Thread Starter
Registered User
iTrader: (15)
 
Joined: Apr 2009
Posts: 605
Likes: 1
From: Oregon
Default

Originally Posted by biggersNISMO
My motordyne looks pretty nice.... and sounds nice....

http://videos.streetfire.net/video/M...50z_689187.htm
Right on man! Others?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
Li1ag
Exhaust
1
Sep 28, 2015 02:07 PM
SharX59
VQ35HR
5
Sep 27, 2015 09:23 AM




All times are GMT -8. The time now is 07:58 AM.