jerseystyle

iTrader: (22)

Looks/sounds great! So what's in the container?

nismofreak1208

iTrader: (30)

In the container is my type 2 voltex wing with 275mm stands and MCR canards (+a laundry list of parts from z1auto)

nismofreak1208

iTrader: (30)

Attempted to install the BCR harness bar but kept running into problems when aligning the bolt to the other side of the car and so after about 6 hours, we ended up having to get another bolt, unbolt the other side (which was good), then manage to bolt the problematic side up just fine. Then ran into the same problem on the GOOD side and only after two minutes of trying to thread in the bolt, ended up stripping the hole on the b pillar.....yup......we tried our best but somehow it just kicked our butts. Hopefully tmrw it'll be on and everything will be good to go! I shall update as the products slowly get installed.....

KingBaby

iTrader: (3)

Still frustrated!



<----mechanical pride has been severly damaged!

nismofreak1208

iTrader: (30)

hey rod, what part were you talking about that i buy from courtesy nissan? Not the bracket hole thingy for the door, something else that were we talking about that u told me was cheap....i forgot wat it was but it seems like it was important.

KingBaby

iTrader: (3)

This page
http://www.courtesyparts.com/350z-pa...5_863_864.html

This part number = 86868M
http://www.courtesyparts.com/kb_sear....php?keywords=[86868M]+\(z33&cPath=714_715_863_864

nismofreak1208

iTrader: (30)

no no no no, not that part, it was some other part i was looking for before we ran into any problems with the bar, it was not bar associated

nismofreak1208

iTrader: (30)

Can anyone with a regular Z verify this part below as the third brake light on the Z's that sit on the top part of the inner rear window. I looked at mine and since i'm going to be replacing my rear wing and losing that light, i was gonna purchase the light that goes up there. I've seen the chargespeed Z with that light so i just wanted to make sure it wasn't an aftermarket thing.

http://www.courtesyparts.com/350z-pa...5_751_764.html

jerseystyle

iTrader: (22)

Sorry to hear about your issues. Seems like the BCR bar is super high Can't wait to see all the other goodies installed!

nismofreak1208

iTrader: (30)

Flat Black headlights with halo and demon eye...COMPLETE

KingBaby

iTrader: (3)

awesome...

nismofreak1208

iTrader: (30)

Rod, could you link me to the info about spacers and the need to do and such? I'm gonna pull the trigger on some wider spacers....

jerseystyle

iTrader: (22)

Headlights look great. Who did the work?

nismofreak1208

iTrader: (30)

A local member of our VQ INC did it. He's a G owner but started doing the headlight work for both Z's and G's. I'll try to take a pic of it in the daylight once i get off work.

nismofreak1208

iTrader: (30)

Just installed the 380RS gas pedal today, took me more than 1 minute due to the fact that I had to remove the stock black fastener on the lower part of the pedal and transfer it to the new pedal. So, took me 5 minutes, but here she is!

nismofreak1208

iTrader: (30)

btw, don't mind the light, i needed to see what was going on and this was a completely RANDOM install i did at night for no reason.

jerseystyle

iTrader: (22)

Awesome. I have the same mod.

nismofreak1208

iTrader: (30)

Xmas came early for me today

KingBaby

iTrader: (3)

Out and about...

shaking the dust off!









http://www.youtube.com/watch?v=hJHYcCv2ryU
http://www.youtube.com/watch?v=Y-nqk4ySKM0
http://www.youtube.com/watch?v=8Aam0W8f8Xk

jerseystyle

iTrader: (22)

I totally need to deploy again!