So I am just installing my nitrous kit, and what do I use for the purge line? I have a NX iceman purge solenoid. It comes with the solenoid, a metal fitting, i small washer of some kind and a thin metal pipe. I read to use a vacuum line, but what size? Where can I get one, and how can I make two purge exits (one on each wheel well)

 

Are you sure you want to be doing this? It really does not sound like you have any idea what you are doing. Good luck though...

 

Yeah, I hooked it up myself, and everything is working already, the only thing I don't have hooked up is the purge valve, because I don't know where to find the vacuum hose. Thanks for calling me a retard.

 

vacuum hose? You mount the purge right next to the nitrous solenoid. Wire it and point the "small metal pipe" in the direction you want the nitrous to purge....no vacuum hoses to mess with any point during nitrous install (wet kit anyway). If you want two exits for purge, you'll need more "small metal pipe" or another purge solenoid and some steel braided line.

 

Cool. Where do you buy the "small metal pipe?" Lowe's, Autozone, Advanced, Internet, etc...

 

check online...jeremy (audible mayhem) might be able to get you some.