Throttle Body Pic (with Zex jet mount area) for those interested!
04-14-2003, 08:23 PM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: NOR - CAL
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
Throttle Body Pic (with Zex jet mount area) for those interested!
Upped my jets to 75HP, made a HUGE difference.
While we had it apart (my buddy Brandon again) I snapped a pic of the Throttle Body.
Too bad it wasn't ported and polished!
pic here
While we had it apart (my buddy Brandon again) I snapped a pic of the Throttle Body.
Too bad it wasn't ported and polished!
pic here
Last edited by 12SecZ; 04-14-2003 at 08:58 PM.
04-15-2003, 05:37 AM
#2
Registered User
Join Date: Jan 2003
Location: Virginia
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Are my eyes deceiving me or did you place your nitrous/fuel nozzle after the throttle body butterfly? Did your installer drill a hole into your manifold's intake tract? I thought common practice was to place the nozzle before the butterfly...in the intake tube.
Just curious as I also have the Zex kit. Thanks.
Just curious as I also have the Zex kit. Thanks.
04-15-2003, 09:41 AM
#5
Registered User
Thread Starter
Join Date: Nov 2002
Location: NOR - CAL
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
you had 60 right? I thought you were going to 100, or did you decide you liked the engine you have?
---------
LOL,
Close, it just runs like a bat out of hell with the 75HP shot and you have to remove the CAI and TB to change the jets.
All times posted are with 65HP jets, tomorow I run with 75HP jets. Big deffierence in SOTP so far plus the bottle heater and the pull the brake fuse mod will be used!
As for the Jet location that is where the authorized ZEX installer said it goes. With the CAI on you can't even tell I have a N20 kit, it's stealthed.
---------
LOL,
Close, it just runs like a bat out of hell with the 75HP shot and you have to remove the CAI and TB to change the jets.
All times posted are with 65HP jets, tomorow I run with 75HP jets. Big deffierence in SOTP so far plus the bottle heater and the pull the brake fuse mod will be used!
As for the Jet location that is where the authorized ZEX installer said it goes. With the CAI on you can't even tell I have a N20 kit, it's stealthed.
04-16-2003, 05:36 PM
#7
Registered User
Join Date: Mar 2003
Location: Lexington, KY
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
But these seat covers.....Awww Max! 
04-16-2003, 08:52 PM
#9
Registered User
Thread Starter
Join Date: Nov 2002
Location: NOR - CAL
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
The seat covers are temporary for now to protect my leather.
I wear a big black duty belt full of stuff in this car and it was marring up my leather on the side of the drivers seat and almost ripped it on the seam.
I used Eagle One leather cleaner and rich conditioner to cover and protect it until I can find a better idea last time I detailed my baby. I sort of panicked when I saw the damage my belt was doing!
They only cost 19 bucks, underneath is Touring Frost Leather.
Edit , didn't get to race either, next wednesday. Bummer.
I wear a big black duty belt full of stuff in this car and it was marring up my leather on the side of the drivers seat and almost ripped it on the seam.
I used Eagle One leather cleaner and rich conditioner to cover and protect it until I can find a better idea last time I detailed my baby. I sort of panicked when I saw the damage my belt was doing!
They only cost 19 bucks, underneath is Touring Frost Leather.
Edit , didn't get to race either, next wednesday. Bummer.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
