Water/Meth Injection on Spray
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Canada
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Water/Meth Injection on Spray
Well i purchased all my goodies for my Wet 100 shot. All dynotune. Bottle warmer, remote opener etc etc.
For that size shot i'm guessing i should be pulling 3-4 degrees of timing in the window switch rpm range correct?
My thought was to run 50/50 water/meth injection when on the nitrous so i did not have to pull any timing.
What do people think of this? I know water/meth injection with nitrous is a pretty common setup.
Cheers
For that size shot i'm guessing i should be pulling 3-4 degrees of timing in the window switch rpm range correct?
My thought was to run 50/50 water/meth injection when on the nitrous so i did not have to pull any timing.
What do people think of this? I know water/meth injection with nitrous is a pretty common setup.
Cheers
#2
Registered User
iTrader: (20)
Join Date: Jun 2006
Location: delaware
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
i would still pull 4 degrees and strap up to a dyno and make a couple of pulls adding a .5 degree back at a time untill you get a knock then back out 1.5 degree. you should be able to run more timing then someone without the water/meth kit but everycar is different so to be safe i would try what i sugested above. also you can run a higher percentage of meth in your mix for better results.
Thread
Thread Starter
Forum
Replies
Last Post
Workshop12
Exterior & Interior
256
03-23-2020 01:45 PM
bcoffee20
Zs & Gs For Sale
5
11-19-2015 06:39 PM
CFAUVEL
Exterior & Interior
3
10-01-2015 03:20 PM