My 350z Nos install
#1
My 350z Nos install
Ok quick one, i had a nos kit lying around, i was going to go turbo, then the shop stuffed me over, so i decided to use my NOS
Anyway.
Im in Johannesburg South Africa, i live at 5500 + feet altitude.
i used the following kit.
Nos sniper kit - added one Fogger as i have an 2008 HR.
Nitrous express Maximizer 4
Nitrous express bottle heater.
We wired the controller into the TPS and Into the Innovate wideband that i had installed in my door vent.
I have set it up using the AFR and im running the following
3000 rpm i bring the happy gas in at 20% nitrous i cut the nitrous at 6750 RPM at a maximum of 80 %
i managed a good 75 bhp on the wheels and 106 lbs torque and that torque gain is from 3000 rpm all the way across to 6000 -
Car pulls like a steam train it just livens the car up.
only issue i have right now is the AFR seems to be on the low side of 10's ?
Anyway.
Im in Johannesburg South Africa, i live at 5500 + feet altitude.
i used the following kit.
Nos sniper kit - added one Fogger as i have an 2008 HR.
Nitrous express Maximizer 4
Nitrous express bottle heater.
We wired the controller into the TPS and Into the Innovate wideband that i had installed in my door vent.
I have set it up using the AFR and im running the following
3000 rpm i bring the happy gas in at 20% nitrous i cut the nitrous at 6750 RPM at a maximum of 80 %
i managed a good 75 bhp on the wheels and 106 lbs torque and that torque gain is from 3000 rpm all the way across to 6000 -
Car pulls like a steam train it just livens the car up.
only issue i have right now is the AFR seems to be on the low side of 10's ?
#3
i will try get some clips up this week as i have some time now at home. will also try get to the dyno, just need to get the AFR right as its running a wee bit rich hey