Louisiana Z/Import cookout April 29th *Lakefront*
Registered User
iTrader: (5)
Join Date: Jul 2007
Location: NOLA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
glad u told me that. firestone over here is open till 6pm. guess ill just have to get it aligned with the tires on it now. do what john did with the lifetime alignment
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
I am trying to do the install for my head unit but its not powering up. What should be my first thing to check?
Seems like all the wires are matched up to their proper ones.
The bose works fine. When I switch out the bose with my new unit, and connect the two wiring harness pieces, no power to my new unit.
Seems like all the wires are matched up to their proper ones.
The bose works fine. When I switch out the bose with my new unit, and connect the two wiring harness pieces, no power to my new unit.
Last edited by NewOrleans350z; 03-13-2009 at 06:34 PM.
Registered User
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
I am trying to do the install for my head unit but its not powering up. What should be my first thing to check?
Seems like all the wires are matched up to their proper ones.
The bose works fine. When I switch out the bose with my new unit, and connect the two wiring harness pieces, no power to my new unit.
Seems like all the wires are matched up to their proper ones.
The bose works fine. When I switch out the bose with my new unit, and connect the two wiring harness pieces, no power to my new unit.
Try grounding it to the chassis if it isn't.
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Do I need to ground the wire to the actual car, or can I jsut connect it to the wire harness ground wire? Shouldnt it connect up with the factory ground wire?
Registered User
iTrader: (5)
Join Date: Jul 2007
Location: NOLA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
if you have a wire harness then that should work. i didnt need any additional grounds on my headunit with the harness. check any fuses on it. sometimes there is a large fuse on the back of the unit next to the wire harness. if it still doesnt work then ground it somewhere that is bare metal
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Seems like everything is connected properly.
Im hoping the unit isnt damaged...
If I disconnect all the wires and start over again, which wires do I need to connect jsut to test power? The power wire and the ground?
Im hoping the unit isnt damaged...
If I disconnect all the wires and start over again, which wires do I need to connect jsut to test power? The power wire and the ground?
Last edited by NewOrleans350z; 03-13-2009 at 07:32 PM.
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Z-GiRL
iTrader: (7)
Join Date: May 2007
Location: shreveport, la
Posts: 3,677
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
So i just unhooked the red yellow and black wires. I grounded the black to a screw and it worked. Any idea why it wasnt grounding through the stock harness ground?
Also, whats the best place to ground behind the dash? I just have it grounded into a screw by the shift **** right now.
Also, whats the best place to ground behind the dash? I just have it grounded into a screw by the shift **** right now.
Registered User
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
So i just unhooked the red yellow and black wires. I grounded the black to a screw and it worked. Any idea why it wasnt grounding through the stock harness ground?
Also, whats the best place to ground behind the dash? I just have it grounded into a screw by the shift **** right now.
Also, whats the best place to ground behind the dash? I just have it grounded into a screw by the shift **** right now.
Shouldn't be too hard to find metal back there, I can't remember where mine was.
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Now I have power, but no sound, haha. Any more bright ideas?
Registered User
Join Date: Jan 2009
Location: New Orleans
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Just did a search and one suggestion was to connect the blue/white amplifier wire. Didnt think I had to connect that one because I dont have an amp, but apparently it still needs to be connected.