Yeah thats right! If you have a deep 14mm socket and a nice wrench..okay the tools needed for it, it'll be a tastey dinner! Let me know who can help or atleast guide me! I have a jackstands and a jack and the basic tools, as well as a single car garage, good enough to work on 1 side at a time!

 

Where are you in NJ?

 

Old Bridge, Centeral NJ.. 08857 zip

 

lol

 

man ur 2 week drive away. it better be some nice dinner if i install it

 

lol

 

yeah...drive to NY and i'll help you...or just call MRC (shamlessplug!!!!!!)

 

hah i can just yell out my backyard and julian would hear me. I wanted to do this myself with guidance. I've heard its easy so i'll give it a shot. The sway bars actually come in tuesday. I thought they were coming from near by but i lied!

Ill definately let MRC install springs, dampeners and F/R camber equipment though when I have the dough to buy them.. I dont mess with that stuff :-D

 

Sooo...anyone? My calls to MRC have gone unanswered. Ill stop by tomarrow to check if they're there, otherwise, i'll tackle this alone..

 

Its really not that hard--Just Nuts and Bolts. Thats my advice, Send Dinner UPS or Fed Ex----Wait !!! Just Fax it !!!----Im starved !!!!!!!

 

I did my Hotchkis front and rear sway bars infront of my townhouse by myself. Breaker bar made it easier. You should be able to do this alone

 

Come down to our meet on Sunday. We have everything you need at the shop, including plenty of guys to help you. ZaG meet on Nov 5th.
https://my350z.com/forum/north-east/225455-nov-5th-zag-meet.html

 

Fax would be way too slow. I'll email it to you. Honestly, im scared of breaking something like a bolt or something. I've already broken like 3 or 4 14mm forged bolts and misthreaded the bolt on the plenum. Working on a car isn't for me lol. Im pretty good with tools but i just don't have small enough hands!

 

Well --Just be patient and take ur time ---The more u do it , the better u get at it
But Theatrix has u covered ---Bring a bucket of KFC !!!!

 

i live right in manalapan so im only 10 minutes away. i installed my friends sway bars on his Z during the summer and it was mad easy.

 

Did you get them done? woulda helped you but i only saw this today. Sorry bout the sausage fingers haha

 

Well i did it tongiht. In 40 degree weather. Rear wasn't too bad, it was a pain to get it around the exhaust since one side is welded. The front was much easier except that my friend stripped the bolt on the driver side end link. I was able to get it off but since I didnt have another 17mm bolt, i reused that one, and only tightened to 30 ft-lbs instead of 40 ft-lbs as instructed by the manual. It was still tight, and i plan on putting on a new unstripped 17mm nut in in a few days.

Overall, the car was tighter. Its not MUCH stiffer so thats its uncomfortable, but it got rid of 70% of the body roll. I was able to take turns quite a bit harder. I can't wait to get springs/dampeners!