Will trade my 19" gunmetal Axis Hiros wrapped in S03's for OEM 18's w/TPS+1k$
08-08-2004 | 09:29 PM
#21
Registered User
Joined: Oct 2002
Posts: 108
Likes: 0
From: NYC
Re: Re: Re: Re: Re: Will trade my 19" gunmetal Axis Hiros wrapped in S03's for OEM 18's w/TPS+1
Originally posted by zeroday
These are 19" rims, 9.5" wide in back, 8.5 in front. The offset is +20 in the rear and +15 in the front. The rear tires are 285/35/19 and the fronts are 245/35/19 which give you the correct diameter for VDC/TCS. Axis designed these rims for the 350z. They are wrapped in bridgestone pole position SO3's. As far as damage, there is a small scrape on the inside of one rim that happened when i mounted them (about half an inch long). I caught the inside of the rim on the brake rotor. Since it's on the inside of the rim that's painted gunmetal (not the spokes/lip)its not noticeable unless you get real close. Getting a little picky, there are also some small acid rain drop looking spots inside some of the rims that arent very noticeable. I think when i had the car at the beach some salt water droplets got on the some of the rims and etched some droplet sized marks on the clear coat. The lip and outer spokes of the rims dont have any marks/curb rash at all though and unless you look really close behind the spokes for the stuff i mentioned, the rims look perfect. I'm asking 900$ plus your OEM 18's with tps sensors. I paid 2600$ at northeast autodesign about 3 months ago for these. I rarely drive my Z and have only put about 2-300 miles max on the new wheels/tires. Since the stock 18's usually sell for 7-800$ for all four used (i sold mine to victor the site admin for 700 w/tps) figure you're getting what i spent 2600$ on and waited 3 months for for 1600 bucks and you avoid the hassle of selling/shipping your stock wheels.
If you're still interested let me know and i can get closeup pics of the flaws on the rims.
These are 19" rims, 9.5" wide in back, 8.5 in front. The offset is +20 in the rear and +15 in the front. The rear tires are 285/35/19 and the fronts are 245/35/19 which give you the correct diameter for VDC/TCS. Axis designed these rims for the 350z. They are wrapped in bridgestone pole position SO3's. As far as damage, there is a small scrape on the inside of one rim that happened when i mounted them (about half an inch long). I caught the inside of the rim on the brake rotor. Since it's on the inside of the rim that's painted gunmetal (not the spokes/lip)its not noticeable unless you get real close. Getting a little picky, there are also some small acid rain drop looking spots inside some of the rims that arent very noticeable. I think when i had the car at the beach some salt water droplets got on the some of the rims and etched some droplet sized marks on the clear coat. The lip and outer spokes of the rims dont have any marks/curb rash at all though and unless you look really close behind the spokes for the stuff i mentioned, the rims look perfect. I'm asking 900$ plus your OEM 18's with tps sensors. I paid 2600$ at northeast autodesign about 3 months ago for these. I rarely drive my Z and have only put about 2-300 miles max on the new wheels/tires. Since the stock 18's usually sell for 7-800$ for all four used (i sold mine to victor the site admin for 700 w/tps) figure you're getting what i spent 2600$ on and waited 3 months for for 1600 bucks and you avoid the hassle of selling/shipping your stock wheels.
If you're still interested let me know and i can get closeup pics of the flaws on the rims.
Check your PM
08-31-2005 | 04:59 PM
#29
Thread
Thread Starter
Forum
Replies
Last Post