Can anyone recommend a performance shop in the Seattle area? I want to install Crawford plenum, headers and cats, JWT cams, Stillen exhaust, and re-flash (TechnoSquare) the ECU. I will be quite happy with only 280 rwhp!

 

haven't really seen one. do an advertisement if you find one!

 

Here ya go. http://www.carbconn.com/

I had them dyno my G35 Sedan, but did all the installing myself. They seem to be pretty competent. Had an intercooled TT S2000 in there that was sick.

 

Here's a place in Kent that I've read about. Don't know about their quality, but I'm looking for a place to dyno before I install my plenum spacer. Maybe we can get a dyno day discount going?

http://www.intecracing.com/

 

You can go to worldoneperformance in seattle, or you can go to axiommotorsports in tacoma

 

Thanks for the responses! However, since I want to install headers and cams, I would really, really, like to find a shop that has experience with the VQ35 and that level of work. Thanks, again.

 

I would do the header myself, infact the only thing I wouldn't do is the camshafts. If you need help get ahold of me, I've done almost everything you can imagine to my Z: bodykit, headers, exhaust, suspension, intake, TS ecu, brake mods.
This coming weeekend the flywheel and clutch are getting changed to the JUN flywheel w/ACT street clutch.

 

Intec is off 212th street. They had a dyno day last week, the guys there are pretty cool it wouldn't hurt to give them a call and ask them some questions. I've never had anything done there but asking can't hurt!

 

If you what someone that has done lots of work with the VQ the only place I know of that has done Cams, superchargers and all the bolt ons is Advantage Nissan in Bremerton.

They are going to cost more then most shops but they do good work and stand behind it. Not to mention they will not void your warranty. Hell, they swapped a transmission on my car under warranty and I have a Greddy twin turbo kit that I installed myself.

If you call them talk to Brad the service manager, They are all car guys there. It's a nice change for the dealer to be into this stuff. Here's the number (360) 373-6300
Gary

 

Thread copied to another section.