Selling this BRAND NEW (not refurb) 10" Dual 4-ohm sub. This sub is badass, handling 600w RMS & 2000w Peak and weighing 20+ lbs. b/c of the huge magnet.

I just got it this week, but am forced to sell b/c it doesn't fit in my custom fiberglass box. Same brand that Drew has in his Z, just one step down.


Retails for $287. Asking just $140 local pickup.






Specs:
Mounting Depth - 6"
Mounting Hole Diameter - 9.25"
Overall Diameter - 11"
Bolt Hole Circle - 10.125"
Motor Width - 6.25"
Motor Depth - 3.25"
Basket Depth - 2.75"
Displacement - 0.14 cu. ft.
Weight - 20 lbs.

Electrical Q Value -Qes: 0.46
Mechanical Q Value -Qms: 4.4
Total Speaker Q Value -Qts: 0.42
Free Air Resonance -Fs: 26.6 Hz
Equivalent Compliance -Vas: 31 liters
One-Way, Linear Excursion -Xmax: 18 mm
Efficiency -SPL 1W/1m: 83.2 dB SPL
Effective Piston Area -Sd: 310 cm^2
DC Resistance -Re: 2.8 ohm
Nominal Impedance -Znom: Dual 2/4 ohm
Thermal Power Handling -Pe: 600 W
Force Factor -Bl: 17.7

 

you could have a spacer cut to space it out somewhat if the length is the issue

 

No, it's not that. I checked dimensions before I ordered. Mounting depth & diameter are fine. It's because of the shape of this 4080 box. There are curves that come in contact with the basket (spider).

 

Will it fit in the stock Bose sub box?

 

flip it? bump ! nice sub

 

Flip it? That will kill the 4080 box'

 

the bose set comes with a sub?

 

sno-no, the stock sub is like a pancake on a metal thing

 

Are you sure it won't fit the Z? My friend is running a JL sub w/his Bose system in the stock location behind the driver's seat.

 

Tell me how this can be done.

 

I thought you were talking about using the stock bose metal taking out the sub and replacing the bose sub with this....that wont work.

Now, if you just want to put the sub in factory location with your own sub box...that would work, as long as you take out the bose metal piece/sub

 

There you have it.

 

Sold!