What have you done for your Z today?
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Wrapped the front section of my hood
New Member
iTrader: (9)
New Member
iTrader: (1)
6 inch cawk is my fave!
iTrader: (3)
I wrapped an oem spoiler and it was a complete *****... Think I posted a pic on this thread... But the hood and big flat pieces should be pretty easy... Tight curves not so much.
New Member
iTrader: (9)
New Member
New Member
VQ35HR PCV 1/2 done
Replaced the PCV Valve on the passenger side of the VQ35HR. Looked and searched and forget about finding the driver's side. Google was not on my side, maybe need to seek a professional Nissan Mechanic to find it.
Here is the pic of the Driver's side valve cover
Here is proof that there are (Two) PCV Valves on the VQ35HR, but
yes there was an easy find for the G37HR motor
Good luck on finding the driver's PCV Breather Valve...anyone want to chime in with proof of the driver's PCV Valve.
Yeah, so I only changed the PCV Valve on the passenger side.
Here is the pic of the Driver's side valve cover
Here is proof that there are (Two) PCV Valves on the VQ35HR, but
yes there was an easy find for the G37HR motor
Good luck on finding the driver's PCV Breather Valve...anyone want to chime in with proof of the driver's PCV Valve.
Yeah, so I only changed the PCV Valve on the passenger side.
6 inch cawk is my fave!
iTrader: (3)
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Nice job, br0!
The following users liked this post:
dboyzalter (03-17-2016)
New Member
Finally got my rear subframe connector brace from ultra racing. Ever so slightly heavier then the OE brace. Gives more clearance for accessing the exhaust flanges which is a major plus that i was not expecting. Definitely looks alot better then the damaged brace that I bought the car with.
The following users liked this post:
QuintonC (03-17-2016)
6 inch cawk is my fave!
iTrader: (3)
Your original looks 95% better than the one on my car and my my **** Z I tortured myself
Last edited by dboyzalter; 03-17-2016 at 01:20 PM.
The following users liked this post:
F2CMaDMaXX (03-17-2016)
New Member
Glad you managed to get it out, sry to hear about the rain though. Definitely murphy's law.
6 inch cawk is my fave!
iTrader: (3)
Went medieval on its ***
Still probably have a good couple hours of work to get to a point where I can install the new one..
Still probably have a good couple hours of work to get to a point where I can install the new one..
Last edited by dboyzalter; 03-17-2016 at 01:24 PM.
Registered User
iTrader: (2)
Rusty, nice pickup on that brace. I saw it a few pages back (I think). Been meaning to pick it up since mine is also destroyed.
Dboyz, sounds like you are having incredible luck today.
Dboyz, sounds like you are having incredible luck today.
6 inch cawk is my fave!
iTrader: (3)
Its expected, went pretty much exactly as planned so far... Would have been nice if I could have just broken off some of the bolts because the room for cutting isn't plentiful.
Still calling today a success... Hopefully halfway done. People that say they put their new exhaust on in an hour are jerks...
Still calling today a success... Hopefully halfway done. People that say they put their new exhaust on in an hour are jerks...
Its expected, went pretty much exactly as planned so far... Would have been nice if I could have just broken off some of the bolts because the room for cutting isn't plentiful.
Still calling today a success... Hopefully halfway done. People that say they put their new exhaust on in an hour are jerks...
Still calling today a success... Hopefully halfway done. People that say they put their new exhaust on in an hour are jerks...
hahaha
6 inch cawk is my fave!
iTrader: (3)
My next car im going to get imported from Texas. My cheesy supposed stainless steel exhaust is already rusted after maybe 5 months and maybe 1000 miles... I know its not of good quality but damn...
Took me about an hour and a half to get the car off the ground and get the y pipe back off... Those rubber exhaust hangers suck.
Took me about an hour and a half to get the car off the ground and get the y pipe back off... Those rubber exhaust hangers suck.