Buddy bro northeast chat thread.
#982
I dont think I will be able to get my cat bolts off so I figured it might be best to swap it all at the same time.
The G is almost all apart, a few more days and its cut up time.
#987
Registered User
iTrader: (3)
Where did you have the catch can mounted at Craig? I'll have to get some lines and fittings, but if it functions, I'd come buy the intake and catch can off you.
Wow those OEM manifolds are horrible now that you see them in the light of day. May try to snag Matt's DC headers since he's been trying to sell them for 7 months now.
Wow those OEM manifolds are horrible now that you see them in the light of day. May try to snag Matt's DC headers since he's been trying to sell them for 7 months now.
#988
New Member
iTrader: (7)
My old catch can was one of the Saikou Michi catch cans. I did really mount it, it more or less was just shoved between the passenger side valve cover and the battery compartment.
The lines I have for it have also seen better days but they are still here. And I took the air filter off the old setup and sold it with my v2 blower. So you would need an air filter with a 3.5" inlet. But I can give you a wonderful friends discount of $25 for all of it. The air filter setup alone cost me like $80ish in tubing and silicone
The lines I have for it have also seen better days but they are still here. And I took the air filter off the old setup and sold it with my v2 blower. So you would need an air filter with a 3.5" inlet. But I can give you a wonderful friends discount of $25 for all of it. The air filter setup alone cost me like $80ish in tubing and silicone
#991
New Member
iTrader: (7)
So I got 750cc injectors awhile ago because they were a good deal. I wanted 1000cc but I settled. Well they didnt fit, so i took that opportunity to just make the upgrade.
Vince at RT Tuning gave me a good deal on these because they are doing the tuning. Brand new ID1050X injectors. First set they even had a chance to sell. Should lead to much better tuning so I'm happy for that. And they are TINY!
Vince at RT Tuning gave me a good deal on these because they are doing the tuning. Brand new ID1050X injectors. First set they even had a chance to sell. Should lead to much better tuning so I'm happy for that. And they are TINY!
#993
That color is nice... Is it easier this round or just as much of a pain in the *** this round?
Im failing miserably at ball joint removal... I think im going ri give up on this project untill someday when I might actually need some new balljoints.
Im failing miserably at ball joint removal... I think im going ri give up on this project untill someday when I might actually need some new balljoints.
#994
New Member
iTrader: (7)
That looks painful! And that pencil sharpener is mounted very high.
This time around is a little easier just knowing what to expect, but the 3M vinyl is a little harder to work with than Avery. I wish my paint underneath was in better shape, there are a lot of places where it looks like I did a terrible job but its the paint chips underneath.
This time around is a little easier just knowing what to expect, but the 3M vinyl is a little harder to work with than Avery. I wish my paint underneath was in better shape, there are a lot of places where it looks like I did a terrible job but its the paint chips underneath.
#997
Registered User
Since this is the North East section I just wanted to pop in to introduce myself and say hi. So hi! My name's Brandon. I just bought my silver '03 350Z Track about a week and a half ago. I haven't had much fun with her yet as I only got a temp registration yesterday (been waiting on the title). I do have plans for the car but will be taking my time with mods. I have to get back to work full time before I spend more money on the car. I also have to fix the issues first before modding things that technically work lol. I already fixed the brake, VDC off, and slip lights being on by adding brake fluid. Tomorrow I'll be hunting down the fuse for the taillights and I'll be trying to reset the passenger window motor (maybe replacing it altogether if need be). The high beams also do not work. It looks as if the bulbs are HIDs so I'm assuming they are not connected to ballasts (the last owner didn't seem like he had much knowledge of cars). The last thing I need to replace would be the hatch struts since it doesn't stay open on it's own. However, I have already ordered the Depo Bi-Xenon black headlights so I'll take care of the high beams next week when those come in!
I do have other plans for the future. I'd like to get a front lip/splitter, possible side skirts and back bumper/lip (not sure what I'd want yet), different spoiler (no I don't mean a huge wing), and a carbon fiber hood as well as wheels at some point. I can't add cosmetic upgrades though without a little extra performance. The car sounds like it has an aftermarket exhaust already so I'll be looking to add an intake, throttle body, upper plenum spacer and headers to try to open up the air flow a bit more. Who knows, maybe I'll decide to go with a turbo at some point down the road.
I do have other plans for the future. I'd like to get a front lip/splitter, possible side skirts and back bumper/lip (not sure what I'd want yet), different spoiler (no I don't mean a huge wing), and a carbon fiber hood as well as wheels at some point. I can't add cosmetic upgrades though without a little extra performance. The car sounds like it has an aftermarket exhaust already so I'll be looking to add an intake, throttle body, upper plenum spacer and headers to try to open up the air flow a bit more. Who knows, maybe I'll decide to go with a turbo at some point down the road.
#999
New Member
iTrader: (7)
Welcome to the page! Glad to see you have a list of plans and most of them seem to be making that a nice solid car again.
As for the window motor, if I were you I would just go ahead and order a rebuilt motor and swap it in while you are there.
As for hatch struts, I strongly suggest the Z1 ultra high performance struts. Been on my car for about 3 years now and they are as strong as day 1, even in the northeast winters they havent hesitated once.
As far as exterior stuff is concerned, I think the 3 main guys in here (myself, dboyz, and CJM) have a decent diversity of exterior mods to give you an idea. What kind of style do you tend to like?
And if your exhaust tips look stock, chances are its a stock exhaust. Maybe a flange is broken, maybe the resonator has been removed.
As for the window motor, if I were you I would just go ahead and order a rebuilt motor and swap it in while you are there.
As for hatch struts, I strongly suggest the Z1 ultra high performance struts. Been on my car for about 3 years now and they are as strong as day 1, even in the northeast winters they havent hesitated once.
As far as exterior stuff is concerned, I think the 3 main guys in here (myself, dboyz, and CJM) have a decent diversity of exterior mods to give you an idea. What kind of style do you tend to like?
And if your exhaust tips look stock, chances are its a stock exhaust. Maybe a flange is broken, maybe the resonator has been removed.
#1000
Registered User
Welcome to the page! Glad to see you have a list of plans and most of them seem to be making that a nice solid car again.
As for the window motor, if I were you I would just go ahead and order a rebuilt motor and swap it in while you are there.
As for hatch struts, I strongly suggest the Z1 ultra high performance struts. Been on my car for about 3 years now and they are as strong as day 1, even in the northeast winters they havent hesitated once.
As far as exterior stuff is concerned, I think the 3 main guys in here (myself, dboyz, and CJM) have a decent diversity of exterior mods to give you an idea. What kind of style do you tend to like?
And if your exhaust tips look stock, chances are its a stock exhaust. Maybe a flange is broken, maybe the resonator has been removed.
As for the window motor, if I were you I would just go ahead and order a rebuilt motor and swap it in while you are there.
As for hatch struts, I strongly suggest the Z1 ultra high performance struts. Been on my car for about 3 years now and they are as strong as day 1, even in the northeast winters they havent hesitated once.
As far as exterior stuff is concerned, I think the 3 main guys in here (myself, dboyz, and CJM) have a decent diversity of exterior mods to give you an idea. What kind of style do you tend to like?
And if your exhaust tips look stock, chances are its a stock exhaust. Maybe a flange is broken, maybe the resonator has been removed.
I've come across a 350Z in Instagram that I've fallen in love with. I don't want to "copy" him but I may need to (with minor changes and a different color). This is a screen shot I took just to show.