Notices
2003-2009 Nissan 350Z

What have you done for your Z today?

Thread Tools
 
Search this Thread
 
Old 12-19-2017, 07:20 AM
  #14101  
Atreyu'z 350
New Member
 
Atreyu'z 350's Avatar
 
Join Date: Jan 2017
Location: Pennsylvania
Posts: 1,936
Received 262 Likes on 228 Posts
Default

Originally Posted by Gadget
Turtle wax headlight restoration kit, comes with oxidation removing compound, sanding/polishing pads, base and sealer. Cost $9.00 at advanced auto. Just uses purple power for engine bay, still more to do but i got cold and water kept freezing lol.


Holy hell. That's a good price for all of that. I paid $20 for my Mother's kit, and it was on clearance .. I'll have to give Turtle Wax a try next time. I always used their products growing up. Always great results.. Yeah, Purple Power is pretty good. It's like Simple Green.. Hahaha, So you were out there too hosing away in this weather? So was I. I washed the Z the other day(including the undercarriage) in my driveway after that last snow we had. By the time I was finished the whole driveway was a sheet of ice.. My neighbors probably think I'm crazy.

Last edited by Atreyu'z 350; 12-19-2017 at 07:22 AM.
Old 12-19-2017, 08:44 AM
  #14102  
Atreyu'z 350
New Member
 
Atreyu'z 350's Avatar
 
Join Date: Jan 2017
Location: Pennsylvania
Posts: 1,936
Received 262 Likes on 228 Posts
Default

Originally Posted by MicVelo
Not what *I* did to my Z33 today, what someone else did.... got waaaayy too close to it either pulling into the red zone in front of my house or backing into space behind me. 1 foot x 1.5 foot paint scrape and light dent on driver door. I have my suspicions who.... waiting for them to pull up as they always do so I can look at their bumpers.

F'ers..... no note, of course. Again, gotta get off this street! And I'm trying but nothing in a reasonable price/condition bracket selling. Ehhhhhh....


Which car? Your '03?.. That really sux. Right before Christmas, too. People, man. I'm tellin' ya'.
Old 12-19-2017, 08:59 AM
  #14103  
travlee
Master
iTrader: (8)
 
travlee's Avatar
 
Join Date: Jul 2011
Location: Texas
Posts: 48,833
Received 9,101 Likes on 6,557 Posts
Default

Originally Posted by MicVelo
Not what *I* did to my Z33 today, what someone else did.... got waaaayy too close to it either pulling into the red zone in front of my house or backing into space behind me. 1 foot x 1.5 foot paint scrape and light dent on driver door. I have my suspicions who.... waiting for them to pull up as they always do so I can look at their bumpers.

F'ers..... no note, of course. Again, gotta get off this street! And I'm trying but nothing in a reasonable price/condition bracket selling. Ehhhhhh....
people suck..
Old 12-19-2017, 09:19 AM
  #14104  
zakmartin
New Member
 
zakmartin's Avatar
 
Join Date: Feb 2009
Location: Seattle, WA
Posts: 2,822
Received 512 Likes on 377 Posts
Default

Originally Posted by travlee
people suck..
True dat.

Sorry you have such #($*& neighbors, Mic.
Old 12-19-2017, 09:37 AM
  #14105  
MicVelo
350Z/370Z Tech Moderator
MY350Z.COM
 
MicVelo's Avatar
 
Join Date: Oct 2014
Location: Northern California
Posts: 10,065
Received 3,271 Likes on 2,328 Posts
Default

Originally Posted by Atreyu'z 350
Which car? Your '03?.. That really sux. Right before Christmas, too. People, man. I'm tellin' ya'.
Originally Posted by travlee
people suck..
Originally Posted by zakmartin
True dat.

Sorry you have such #($*& neighbors, Mic.
Thanks guys, but while I'm bishin', it's not about garnering sympathy. Just a rant but thanks for commiseration just the same. Hahahaha.

First light view....





Kinda helpin' me decide what to do..... my front and rear bumpers were needing some attention along with the plastic-ish trim (A-pillar and over door) fading. Guess I'll be shootin' the whole car now.

Not sure if I believe in "karma" per se and I'm not *generally* vindictive; but I'd be lying if I said I didn't hope the bad reflects back tenfold.
The following users liked this post:
BigBlue (12-19-2017)
Old 12-19-2017, 09:46 AM
  #14106  
travlee
Master
iTrader: (8)
 
travlee's Avatar
 
Join Date: Jul 2011
Location: Texas
Posts: 48,833
Received 9,101 Likes on 6,557 Posts
Default

damage done by a truck?
Old 12-19-2017, 09:46 AM
  #14107  
zakmartin
New Member
 
zakmartin's Avatar
 
Join Date: Feb 2009
Location: Seattle, WA
Posts: 2,822
Received 512 Likes on 377 Posts
Default

Woah. That's more than a little scratch.

You're really going to be do whole re-spray? The rest of the paint looks pretty good.
Old 12-19-2017, 12:30 PM
  #14108  
tmdz
New Member
 
tmdz's Avatar
 
Join Date: Sep 2017
Location: WA State
Posts: 222
Received 40 Likes on 31 Posts
Default

What a dick move... There is no way that person didn't realize they hit your car.
Old 12-19-2017, 12:54 PM
  #14109  
carbuffguy
New Member
 
carbuffguy's Avatar
 
Join Date: May 2016
Location: Ontario
Posts: 709
Received 122 Likes on 97 Posts
Default

Check Google earth...
Old 12-19-2017, 02:33 PM
  #14110  
zakmartin
New Member
 
zakmartin's Avatar
 
Join Date: Feb 2009
Location: Seattle, WA
Posts: 2,822
Received 512 Likes on 377 Posts
Default

I registered and uploaded all the updates and apps I wanted for my new Autel MaxiSys MS906BT diagnostic scanner. I was playing around with some of the bidirectional functions on the tool and was pretty shocked at the active tests and parameters you're allowed to manipulate using this device.

Apparently, I can change the speed limiter on the car. I'm not going to change it, but does anyone know off the top of their head what the speed limiter is set to and what the MT gearing would roughly allow for if you're using the proper tires? I'm only curious.

I'm pretty psyched about how much better this is than the old Autoenginuity software I was using on my single-core dedicated car laptop before. Also, the new four-channel oscilloscope with the six-core processor is leap years better than what I've been using. It also came with a very nice borescope, which I tested up my nose so that I could explain to my wife how it worked.

Everything's set up to be very intuitive. I'm going to change out my wife's CVT fluid on her Rogue this weekend and the tool lets me reset the CVT fluid sensor to zero (which you need to do to keep the car from thinking it's running on sludge.)

Last edited by zakmartin; 12-19-2017 at 03:33 PM.
Old 12-19-2017, 02:47 PM
  #14111  
tmdz
New Member
 
tmdz's Avatar
 
Join Date: Sep 2017
Location: WA State
Posts: 222
Received 40 Likes on 31 Posts
Default

Originally Posted by zakmartin
It also came with a very nice borescope, which I tested up my nose so that I could explain to my wife how it worked.
Baller move.
The following users liked this post:
zakmartin (12-19-2017)
Old 12-19-2017, 03:14 PM
  #14112  
Atreyu'z 350
New Member
 
Atreyu'z 350's Avatar
 
Join Date: Jan 2017
Location: Pennsylvania
Posts: 1,936
Received 262 Likes on 228 Posts
Default

Wow. That's worse that I thought, Mic... Could be worse though. Sucks you gotta' look directly at it now every time you get in your car.. I would need a hug after that.. and a valium.
Old 12-19-2017, 06:17 PM
  #14113  
SPM350Z
New Member
iTrader: (1)
 
SPM350Z's Avatar
 
Join Date: Aug 2005
Location: California
Posts: 398
Received 163 Likes on 97 Posts
Default

That really does suck Mic. Sorry man. This is pretty much the reason I don't have more cars...I've got 2 in the garage and 2 on the driveway....I won't put any on the street because of smack like this..especially in my neighborhood. But yeah...might as well get a full respray if you feel like other areas on the car could use it too. Turn a negative into a positive and all that.
Old 12-20-2017, 04:59 AM
  #14114  
dboyzalter
6 inch cawk is my fave!
iTrader: (3)
 
dboyzalter's Avatar
 
Join Date: Apr 2015
Location: Mass
Posts: 6,557
Received 972 Likes on 759 Posts
Default

Sorry about your door... What color are you going to repaint it?

If your not scared of snow im pretty sure you could sell your house and buy the biggest mic-mansion in my area for whatever yours sells for...

500k will get you about 4000sqft in a nice area with a big plot of property. And enough garage for all your toys and your daily drivers.
Old 12-20-2017, 06:22 AM
  #14115  
soc_monki
Registered User
iTrader: (2)
 
soc_monki's Avatar
 
Join Date: Dec 2013
Location: Mississippi
Posts: 114
Likes: 0
Received 1 Like on 1 Post
Default

Fixed my driver door speaker. Quit working about a year ago. PO installed pioneer speakers and the connectors were loose. Speaker is crackling arms needs replacement so I'll probably order some new ones soon if I can't find a single replacement.

Doing plugs and belts soon. Need to finish bushings. Got exhaust fixed as well. Still love driving this car!
Old 12-20-2017, 07:39 AM
  #14116  
90nissanS13
New Member
 
90nissanS13's Avatar
 
Join Date: Oct 2014
Location: Florida
Posts: 551
Received 49 Likes on 41 Posts
Default

Carbon wrap doors? Or is that played out these days?



Originally Posted by MicVelo
Thanks guys, but while I'm bishin', it's not about garnering sympathy. Just a rant but thanks for commiseration just the same. Hahahaha.

First light view....





Kinda helpin' me decide what to do..... my front and rear bumpers were needing some attention along with the plastic-ish trim (A-pillar and over door) fading. Guess I'll be shootin' the whole car now.

Not sure if I believe in "karma" per se and I'm not *generally* vindictive; but I'd be lying if I said I didn't hope the bad reflects back tenfold.
Old 12-20-2017, 08:30 AM
  #14117  
dboyzalter
6 inch cawk is my fave!
iTrader: (3)
 
dboyzalter's Avatar
 
Join Date: Apr 2015
Location: Mass
Posts: 6,557
Received 972 Likes on 759 Posts
Default

Cleaned these up a bit.

Old 12-20-2017, 10:47 AM
  #14118  
HOMiEZ
New Member
iTrader: (1)
 
HOMiEZ's Avatar
 
Join Date: May 2003
Location: Irvine, CA
Posts: 448
Received 25 Likes on 16 Posts
Default

MIC, my condolence to your driver door. Every like scratch or dent on my car was caused by something similar. So disappointed.

As for me I washed and cleaned the car. Applied a fresh coat of sealant. Ready for a road trip this weekend. So far the car has been pretty quiet.
The following users liked this post:
zakmartin (12-20-2017)
Old 12-20-2017, 11:38 AM
  #14119  
zakmartin
New Member
 
zakmartin's Avatar
 
Join Date: Feb 2009
Location: Seattle, WA
Posts: 2,822
Received 512 Likes on 377 Posts
Default

Homiez - I'm glad the fix worked for you I'll know if I need to take a different route to get mine resolved after the holiday weekend.
Old 12-20-2017, 11:50 AM
  #14120  
MicVelo
350Z/370Z Tech Moderator
MY350Z.COM
 
MicVelo's Avatar
 
Join Date: Oct 2014
Location: Northern California
Posts: 10,065
Received 3,271 Likes on 2,328 Posts
Default

Thanks for all the kind words, guys (re: the damm damaged door ).

It is what it is I guess. That's what insurance is for. Already paid out.

I polished off all the paint and crap left by the offending whackjob and it's no better. The skin/panel is pushed in to the inner door frame.



My body guy - same one who did the expert color matches on my Shiro and other work (and who I trust implicitly) - will take care of the door and bumpers for roughly the amount of the insurance settlement. So, that's all she wrote.

Was thinkin' maybe it's an omen and that it's time to Rabbit Bunny the car. (sic) But then, ehhhh, no thanks, I like stock appearance. As far as "carbon wrap", nope... I don't believe in the appearance of CF if I'm not actually benefiting from the weight savings or strength of CF so...


Quick Reply: What have you done for your Z today?



All times are GMT -8. The time now is 11:14 AM.