Where Can I Get This Emblem?
Registered User
Joined: Nov 2003
Posts: 509
Likes: 0
From: St.Louis, Missouri
Yeah, I hope they do too! Looks like we just MAY have a chance! It would be nice for them to possibly make the finish brushed alumnium rather than polished. I think brushed alumnium would go with the rest of the car much better.
Registered User
Joined: Oct 2002
Posts: 111
Likes: 0
From: Portland, OR
Hey guys! I just found that emblem from japanese website!!
This emblem is made by Japanese Z owner.
He grinded(?) Nissan emblem and put 'Z' emblem on it. That's what he explained on his website.
Here is the close-up pic. =)
http://www.zcarspace.jp/
This emblem is made by Japanese Z owner.
He grinded(?) Nissan emblem and put 'Z' emblem on it. That's what he explained on his website.
Here is the close-up pic. =)
http://www.zcarspace.jp/
Registered User
Joined: Nov 2003
Posts: 509
Likes: 0
From: St.Louis, Missouri
Looks like S*** closeup in my opinion.
I think that if we could get that same design, but with the finish we have on your "350Z" emblem on the rear left of the hatch, maybe it would be a better idea?
From that picture that was just posted. . . . what is eveyones opinion/ ideas on what we can come up with ?
I think that if we could get that same design, but with the finish we have on your "350Z" emblem on the rear left of the hatch, maybe it would be a better idea?
From that picture that was just posted. . . . what is eveyones opinion/ ideas on what we can come up with ?
Guest
Posts: n/a
ok im just brain storming here
i got a j collection key chain and its made out of the door handle material. i for get whats its called(pretty expensive) anyway maybe we could have the fabrication company use this as an idea see the middle part on the one that was just posted is bowed and rounded i thing if it was flat it would look better.
here is the pic of the keychain . this might help us get started
i got a j collection key chain and its made out of the door handle material. i for get whats its called(pretty expensive) anyway maybe we could have the fabrication company use this as an idea see the middle part on the one that was just posted is bowed and rounded i thing if it was flat it would look better.
here is the pic of the keychain . this might help us get started
Registered User
Joined: Feb 2004
Posts: 131
Likes: 0
From: Las Vegas
Originally posted by mc350z
is it just me or does it not look as good close up?
now maybe we can take this idea and make it better
is it just me or does it not look as good close up?
now maybe we can take this idea and make it better
Registered User
Joined: Nov 2003
Posts: 509
Likes: 0
From: St.Louis, Missouri
mc350z - I love that finish. Remember, we are wanting to put an emblem on our Z that is going to represent a 30k+ car (45k+ for some of us with mods, hehe). I would consider getting nothing but the best in material.
Guest
Posts: n/a
yeah i agree. if we are gonna do it were gonna do it right! im just saying it will be expensive, in th efact that its not plated plastic like our curent emblem. by the way does anyone know what the material is called. all i know it is used in making toys. other than that no idea
Guest
Posts: n/a
its to insert you initial D card!
no i bet its so they can transfer data from the ecu to a hard drive you know like how the GT-Rs actually comes with a computer link up for this purpose
i think being able to print out your gas milageto work and back on you printer at home is very important to the guys over there!
ok back to the emblem discussion.....
no i bet its so they can transfer data from the ecu to a hard drive you know like how the GT-Rs actually comes with a computer link up for this purpose
i think being able to print out your gas milageto work and back on you printer at home is very important to the guys over there!
ok back to the emblem discussion.....
Last edited by **; Feb 23, 2004 at 07:54 PM.
Registered User
Joined: Nov 2003
Posts: 509
Likes: 0
From: St.Louis, Missouri
hehe, yea - back to this emblem.
Hopefully someone can come up with a company that has the equipment that would be able to machine this type of project. They would make a nice chunk of money off of this without a doubt.
Hopefully someone can come up with a company that has the equipment that would be able to machine this type of project. They would make a nice chunk of money off of this without a doubt.
Originally posted by Webiteks
No idea. Titanium would be nice, hehe :-)
No idea. Titanium would be nice, hehe :-)
they could make it out of Aluminum and either brush the finish or bead blast it to match our current trim. You could probably even polish it them anodize it a similar color.