FS: OEM Brembo with upgrades
#1
![Default](https://my350z.com/forum/images/icons/icon1.gif)
This is a feeler for the for my OEM brembos front and rear brakes. Complete with everything you need to get them running. They are comning off of my 2003 G35C and comes with the following upgrades.
-Girodisc 2 piece floating slotted rotors Front and Rear
http://www.girodisc.com/Rotors_c_614.html
https://my350z.com/forum/brakes/3899...g-wonders.html
-Girodisc shims and titanium shields Front and Rear
http://www.girodisc.com/Shields-Shims_c_616.html
-RED FTP braided brake lines Front and Rear
-Axis ULT pads Front and rear
All upgrades are less than 5k miles.
This is the best pic i can find as of now since my car is with ZCG.
![](http://img.photobucket.com/albums/v494/gabe3d/car/IMG_4993.jpg)
The rotors and upgrades alone are $1600. IMO this is the best OEM brembo setup you can get. The rotors saves a significant amount of weight on the front and rear while still preserving your e-brake. I've done some dyno testing on the effect of the rotational weight savings with the rotors and the results can be seen in the marketplace link above. The shims prevents the use of excess brake grease and prevents any squeaks. The ti shields are to reduce the heat transfer to the fluid. The condition of the calipers are in very good condition with some minor chips from road driving, other than that they are in perfect working condition. The braking has much improved with these upgrades, but I'm currently contemplating getting a Trophy Kit. I'm looking for $1800.
-Girodisc 2 piece floating slotted rotors Front and Rear
http://www.girodisc.com/Rotors_c_614.html
https://my350z.com/forum/brakes/3899...g-wonders.html
-Girodisc shims and titanium shields Front and Rear
http://www.girodisc.com/Shields-Shims_c_616.html
-RED FTP braided brake lines Front and Rear
-Axis ULT pads Front and rear
All upgrades are less than 5k miles.
This is the best pic i can find as of now since my car is with ZCG.
![](http://img.photobucket.com/albums/v494/gabe3d/car/IMG_4993.jpg)
The rotors and upgrades alone are $1600. IMO this is the best OEM brembo setup you can get. The rotors saves a significant amount of weight on the front and rear while still preserving your e-brake. I've done some dyno testing on the effect of the rotational weight savings with the rotors and the results can be seen in the marketplace link above. The shims prevents the use of excess brake grease and prevents any squeaks. The ti shields are to reduce the heat transfer to the fluid. The condition of the calipers are in very good condition with some minor chips from road driving, other than that they are in perfect working condition. The braking has much improved with these upgrades, but I'm currently contemplating getting a Trophy Kit. I'm looking for $1800.
Thread
Thread Starter
Forum
Replies
Last Post