FS: a used st800 system?? cheap $250??
Hey i want to buy this system but only if you can also install it in a 2003 g35 coupe
located in socal. will be willing to drive to where you are. just pm me an addres or intersection zip code so i have a fair idea.
serious buyer.
located in socal. will be willing to drive to where you are. just pm me an addres or intersection zip code so i have a fair idea.
serious buyer.
Thread Starter
Registered User
iTrader: (13)
Joined: Oct 2009
Posts: 1,107
Likes: 3
From: CALIFORNIA
i will install the system for you if you pay me the installation fee. it will take atleast 4 hours to install because i dont know your wiring colors. i have to look it up. 200 for installation. or you can buy it from me and have some one else install it for you. if you ask me to install the system within any fee then i rather sell the system to a member here who offered 200 dollars and i rejected.
so your saying 250 + 200 install? 450? hmm
its about 300+200 brand new installed i think right?
i am just having a hard time looking for an installer
... i still don't know where your located...i am coming from 91768 so if you can tell me how far you are thats good enough for now so i can factor in drive time so i can make a decision
let me know if you meant 450 with install or is there any room in that price or not..
thanks
its about 300+200 brand new installed i think right?
i am just having a hard time looking for an installer
... i still don't know where your located...i am coming from 91768 so if you can tell me how far you are thats good enough for now so i can factor in drive time so i can make a decisionlet me know if you meant 450 with install or is there any room in that price or not..
thanks
i will install the system for you if you pay me the installation fee. it will take atleast 4 hours to install because i dont know your wiring colors. i have to look it up. 200 for installation. or you can buy it from me and have some one else install it for you. if you ask me to install the system within any fee then i rather sell the system to a member here who offered 200 dollars and i rejected.
Thread Starter
Registered User
iTrader: (13)
Joined: Oct 2009
Posts: 1,107
Likes: 3
From: CALIFORNIA
so your saying 250 + 200 install? 450? hmm
its about 300+200 brand new installed i think right?
i am just having a hard time looking for an installer
... i still don't know where your located...i am coming from 91768 so if you can tell me how far you are thats good enough for now so i can factor in drive time so i can make a decision
let me know if you meant 450 with install or is there any room in that price or not..
thanks
its about 300+200 brand new installed i think right?
i am just having a hard time looking for an installer
... i still don't know where your located...i am coming from 91768 so if you can tell me how far you are thats good enough for now so i can factor in drive time so i can make a decisionlet me know if you meant 450 with install or is there any room in that price or not..
thanks
the reason for 200 install that i gave you is because i didnt want to drive to your place or meet you half way. i am locating in La Jolla California. Near san diego area. I actually dont like to install the system on a G because i dont know where all the wire are located and i will have to search for the wire. it would take me a really long time to do it. i was thinking of atleast 4 hours +.
if you have an 2006 Z or anyone have an 06 z i can install this system for you for 350 total.
if you gonna do it yourself then i will help you without charge as much as i can. since i am doing the installation, it is fair to get some money for my time. Plus i will be held responsible for any damages to your car too.
I can do $350 install for you if you are agree to not hold me responsible for damages during installation.
i believe you can find lots of member here can help you with the installation for free if you live close to them.
Last edited by sssmasss; Oct 11, 2011 at 09:50 PM.
wait where you get the system for 300 brand new bro? anywhere i look it is atleast 360 now. i bought this system when it was $390 from auto-innovatio.com. I sold it to Racism because i didnt want to install the system. but then i decided to install the system again. i then bought it of an authorized seller on ebay for 370. But the ebay seller got an EZCar and he hooked me up for $350 and i took that deal. Anyways, now they, st800 sellers, lowered it to $360. ebay selling for the same price.
the reason for 200 install that i gave you is because i didnt want to drive to your place or meet you half way. i am locating in La Jolla California. Near san diego area. I actually dont like to install the system on a G because i dont know where all the wire are located and i will have to search for the wire. it would take me a really long time to do it. i was thinking of atleast 4 hours +.
if you have an 2006 Z or anyone have an 06 z i can install this system for you for 350 total.
if you gonna do it yourself then i will help you without charge as much as i can. since i am doing the installation, it is fair to get some money for my time. Plus i will be held responsible for any damages to your car too.
I can do $350 install for you if you are agree to not hold me responsible for damages during installation.
i believe you can find lots of member here can help you with the installation for free if you live close to them.
the reason for 200 install that i gave you is because i didnt want to drive to your place or meet you half way. i am locating in La Jolla California. Near san diego area. I actually dont like to install the system on a G because i dont know where all the wire are located and i will have to search for the wire. it would take me a really long time to do it. i was thinking of atleast 4 hours +.
if you have an 2006 Z or anyone have an 06 z i can install this system for you for 350 total.
if you gonna do it yourself then i will help you without charge as much as i can. since i am doing the installation, it is fair to get some money for my time. Plus i will be held responsible for any damages to your car too.
I can do $350 install for you if you are agree to not hold me responsible for damages during installation.
i believe you can find lots of member here can help you with the installation for free if you live close to them.
oh i emailed auto innovatio and asked for a discount and they said they can do 300 plus shipping. ezcar for 350? wow i talked to the guy in san diego and he said 450 min to me lol...
i am actually taking the instructions to couple install shops nearby to see how much they charge me to install it. can i let you know by tomm?
btw do you think it would be any easier to install it on my g since its an automatic or does it not make much of a difference.
i don't like the idea of an install where the installer isn't responsible at all for any damages you know? i am sure you understand that. i have never done a remote start install and would rather not mess with it.
plus now that i think about it, i think it will be easier to take it back to an install shop nearby if i have any problems
can you tell me if you can ship it to 91768?
and also i have these pics from st800 sellers to assist in installation. i attached them just in case your interested
http://i1201.photobucket.com/albums/...nstallpics.jpg

Thread Starter
Registered User
iTrader: (13)
Joined: Oct 2009
Posts: 1,107
Likes: 3
From: CALIFORNIA
the reason why the ebay seller, from SAN DIEGO, agree to sell the system to me for 350 is because i bought two systems from him. plus i took pictures of step by step and wrote a diy instructions for both system and two videos of how the systems work. i got a discount for doing that. the price i believe were 450 but i heard he got in trouble for selling it too low. he had increased the price to 470 shipped for easycar now bro. I think there is only one dealer in san diego for these systems. i think we are talking about the same guy. Actually, he has a shop in SAN Fernando. You should talk to him about it. his shop will install for you.
yes i can ship it to you for 250. but i think you should get a brand new for 300. is this a group buy price or individual buy price? i want you to buy my system but at the same time i encourage you to get the new system for 300 dollars. even though my system is complete and working but 50 dollars different and you got a brand new system. that is a great deal. having said that, i will be glad to sell you my system.
the pictures you posted is not even that details. i took more pictures and even more detail but i cant shared here because i promised the ebay seller that i wont post it out. i think he only give them to his customers.
yes i understand about the responsibility part. that is why i want 200 dollars for the installation. if anything goes wrong i have more money to cover for the damages. Usually frying the BCM is the main problem. that will cost about 400 dollars!!!!
yes i can ship it to you for 250. but i think you should get a brand new for 300. is this a group buy price or individual buy price? i want you to buy my system but at the same time i encourage you to get the new system for 300 dollars. even though my system is complete and working but 50 dollars different and you got a brand new system. that is a great deal. having said that, i will be glad to sell you my system.
the pictures you posted is not even that details. i took more pictures and even more detail but i cant shared here because i promised the ebay seller that i wont post it out. i think he only give them to his customers.
yes i understand about the responsibility part. that is why i want 200 dollars for the installation. if anything goes wrong i have more money to cover for the damages. Usually frying the BCM is the main problem. that will cost about 400 dollars!!!!
Last edited by sssmasss; Oct 12, 2011 at 12:42 AM.
the reason why the ebay seller, from SAN DIEGO, agree to sell the system to me for 350 is because i bought two systems from him. plus i took pictures of step by step and wrote a diy instructions for both system and two videos of how the systems work. i got a discount for doing that. the price i believe were 450 but i heard he got in trouble for selling it too low. he had increased the price to 470 shipped for easycar now bro. I think there is only one dealer in san diego for these systems. i think we are talking about the same guy. Actually, he has a shop in SAN Fernando. You should talk to him about it. his shop will install for you.
yes i can ship it to you for 250. but i think you should get a brand new for 300. is this a group buy price or individual buy price? i want you to buy my system but at the same time i encourage you to get the new system for 300 dollars. even though my system is complete and working but 50 dollars different and you got a brand new system. that is a great deal. having said that, i will be glad to sell you my system.
the pictures you posted is not even that details. i took more pictures and even more detail but i cant shared here because i promised the ebay seller that i wont post it out. i think he only give them to his customers.
yes i understand about the responsibility part. that is why i want 200 dollars for the installation. if anything goes wrong i have more money to cover for the damages. Usually frying the BCM is the main problem. that will cost about 400 dollars!!!!
yes i can ship it to you for 250. but i think you should get a brand new for 300. is this a group buy price or individual buy price? i want you to buy my system but at the same time i encourage you to get the new system for 300 dollars. even though my system is complete and working but 50 dollars different and you got a brand new system. that is a great deal. having said that, i will be glad to sell you my system.
the pictures you posted is not even that details. i took more pictures and even more detail but i cant shared here because i promised the ebay seller that i wont post it out. i think he only give them to his customers.
yes i understand about the responsibility part. that is why i want 200 dollars for the installation. if anything goes wrong i have more money to cover for the damages. Usually frying the BCM is the main problem. that will cost about 400 dollars!!!!
and i took the guide you wrote actually to an install shop and they said 150-200 installed. so thanks for that
i think i am just going to go for the new one so if i have any warranty issues it will be easier. do you have any tips for the installation btw? and is there anything i can tell them to do that will increase the range in anyway?
and i heard that there is some issue with the lights staying on if you leave them on auto? you heard anything about that?
also can i get your honest opinion as to why you chose the easycar over the st800? i don't really care about the 2way pager but is there any other advantages that make it stand out
thanks for all the advice man i appreciate it and good luck with the sale.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM







