FS: FS: Vinyl car/roof/etc wrapping material - Blow out
12-13-2011, 10:49 AM
#1
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
FS: Vinyl car/roof/etc wrapping material - Blow out
I am going to be blowing out some over stocked vinyl that I have, to clear up my excess inventory a bit.
First up is my roll of satin black vinyl material. I either have enough for an entire car or I can split it up into smaller sections, based on whatever lengths you need.
Price will depend on the exact length you need. PM me the amount and I'll get you a price.
This is what satin black looks like:
I also have a roll of bright green vinyl, kind of like GT3RS green that I'll take pictures of when I get a chance.
In addition to the rolls above, I'll be discounting all of my matte black, gloss black, 3M 1080 gloss carbon fiber and 3M di-noc matte carbon fiber vinyl materials at 20% off of my regular prices.
Shoot me a PM or e-mail for questions/inquires.
thanks.
-Don
donathon@gmail.com
First up is my roll of satin black vinyl material. I either have enough for an entire car or I can split it up into smaller sections, based on whatever lengths you need.
Price will depend on the exact length you need. PM me the amount and I'll get you a price.
This is what satin black looks like:
I also have a roll of bright green vinyl, kind of like GT3RS green that I'll take pictures of when I get a chance.
In addition to the rolls above, I'll be discounting all of my matte black, gloss black, 3M 1080 gloss carbon fiber and 3M di-noc matte carbon fiber vinyl materials at 20% off of my regular prices.
Shoot me a PM or e-mail for questions/inquires.
thanks.
-Don
donathon@gmail.com
12-15-2011, 08:17 AM
#2
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Just to give you guys an idea of pricing on the satin material. For a roof sized sheet, it'll be $20 + shipping.
Let me know if you guys have any questions or inquires. I will have the lowest prices anywhere for vinyl for the next couple of weeks.
Also, don't forget, in addition to roofs, I can also cut it up into strips and sell it to you to use on your window trims. Here are pictures of an Audi B7 that I vinyl wrapped the window trim in my matte black material to black out his chrome.
Before:
After:
-Don
donathon@gmail.com
Let me know if you guys have any questions or inquires. I will have the lowest prices anywhere for vinyl for the next couple of weeks.
Also, don't forget, in addition to roofs, I can also cut it up into strips and sell it to you to use on your window trims. Here are pictures of an Audi B7 that I vinyl wrapped the window trim in my matte black material to black out his chrome.
Before:
After:
-Don
donathon@gmail.com
12-16-2011, 07:16 AM
#3
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
For comparison sakes, here's pictures of gloss black on this white F10 550i BMW. Been starting to get more of these, as people start purchasing more of these cars. As you can see here, this is my gloss black vinyl material. If you want to go with as close as you can to a panoramic/glass/gloss black paint look, then this is your best option. Owner was around orange county and came out to me in Anaheim Hills to have the roof wrap done.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Trending Topics
12-18-2011, 10:26 PM
#10
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
-Don
Last edited by Don Nguyen; 12-19-2011 at 07:02 AM.
12-19-2011, 07:01 AM
#11
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
I've been getting a lot of people PMing me that they want the satin/matte finish, but those are two different finishes and I just wanted to post pictures of matte black in this thread to show the differences between the two.
So here is a white Subaru STI that I wrapped the roof in my matte black vinyl material.
-Don
donathon@gmail.com
So here is a white Subaru STI that I wrapped the roof in my matte black vinyl material.
-Don
donathon@gmail.com
12-19-2011, 09:03 AM
#12
^^My bad. I thought I forgot to mention I had the xm antenna on my car last time, and a month ago, the quote was for a honda accord with a antenna. And, I thought the price would be different since this thread was supposed to be a blow out sale thread, wondering if the price of the material/installation price would go down, but I guess its the same as before.
12-21-2011, 08:24 AM
#14
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
PM sent. Let me know if you got it or not.
I wanted to post some more pictures of satin black, since that's what this sale/thread is mainly for. I had to dig through some older pictures of guys that bought the satin black vinyl material from me and that DIYed it themselves. Here is a Mazda that bought some satin black vinyl material from me to do his roof with. His roof spoiler is CF, and I think his trunk was carbon fiber as well. It'll give you guys a better idea of how the satin black is in comparison to those pieces. Similar to the 350z in the original post with the satin black roof, the owner of this Mazda DIYed the roof install on his car with my satin black vinyl material.
Satin black:
-Don
Donathon@gmail.com
I wanted to post some more pictures of satin black, since that's what this sale/thread is mainly for. I had to dig through some older pictures of guys that bought the satin black vinyl material from me and that DIYed it themselves. Here is a Mazda that bought some satin black vinyl material from me to do his roof with. His roof spoiler is CF, and I think his trunk was carbon fiber as well. It'll give you guys a better idea of how the satin black is in comparison to those pieces. Similar to the 350z in the original post with the satin black roof, the owner of this Mazda DIYed the roof install on his car with my satin black vinyl material.
Satin black:
-Don
Donathon@gmail.com
12-23-2011, 07:29 AM
#17
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Found some more pictures of my satin black material on the same 350z that's posted above in the original post. Not the best pictures in the world, but hopefully it'll still give you guys a better idea of the finish and how it looks on the car.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
12-26-2011, 07:45 AM
#19
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
PM sent.
Christmas may be over, but I am continuing this until I get rid of all of my satin black material. Unfortunately, I do not have any more pictures of the satin black, but hopefully the ones that I have already posted above will be good enough for you guys to determine the differences and how it looks compared to the other finishes.
Here's a white BMW F10 535i that I recently worked on. I vinyl wrapped the chrome on this car's window trim with my matte black material. It really changes the look of the car completely, since the chrome doesn't match anything else on the car and the window trim especially takes up such a large real estate on the car when looking at it. We went with my matte black vinyl material for the window trim to match the rubber and door pillars that were also already matte black from the factory. The owner of this car was around south Orange County, and I happened to be in that area from Irvine that day so I dropped by to do the vinyl work on his car.
Before:
After:
-Don
donathon@gmail.com
Christmas may be over, but I am continuing this until I get rid of all of my satin black material. Unfortunately, I do not have any more pictures of the satin black, but hopefully the ones that I have already posted above will be good enough for you guys to determine the differences and how it looks compared to the other finishes.
Here's a white BMW F10 535i that I recently worked on. I vinyl wrapped the chrome on this car's window trim with my matte black material. It really changes the look of the car completely, since the chrome doesn't match anything else on the car and the window trim especially takes up such a large real estate on the car when looking at it. We went with my matte black vinyl material for the window trim to match the rubber and door pillars that were also already matte black from the factory. The owner of this car was around south Orange County, and I happened to be in that area from Irvine that day so I dropped by to do the vinyl work on his car.
Before:
After:
-Don
donathon@gmail.com