Screw my damn shift ****!!! it get so hot sitting in the sun for 9 hours then trying to drive it is a *****!!!! Terry towel FTW!!!

 

leather seats burn like a **** lol

 

Yeah, I'd like to meet all of Arkansas's Z community. All I lack is the undershroud. Here's a pic of the bumper...



In other news my Amsoil GL-4 will be here today!

 

Its hard to tell, but do you have front reflectors on the bumper? Whats the front lip made out of? Oh and what is that motor in the engine stand going in?

 

I picked up the bumper and lip from a friend that had bought a newer version Nismo bumper for her supposedly S-Tune Z. I'm told it's an OEM lip, but I believe the S-Tune came with this front bumper so I'm not sure...



The picture was sent to me from one of our regional s2ki members who is a painter. He's got an S2000, 350z, 2nd Gen MR2, and an FD RX7. He's located out of West Monroe, LA so it will be 2 weeks before I can get over there to get the bumper. The reflectors are not in the picture above, but I've got a clear set sitting at the house. I need to pick up some new plastic clips for the installation. I may go back with OEM unless there's a perfect match at NAPA. Anyone know of an alternative match to OE? I wish it wasn't so I hot today so I'd get motivated to work on the car...

 

plastic clip for the bumper to radiator core mount? If so, then I can definitely help

 

Damnit I need to find a good place to spray my bumper and fender who won't try to wreck me on materials.

 

Yes sir! I need those and a few others! I'm hoping the hardware kit for the undershroud replaces most of the ones for under the car though...

 

Contact mike@czp, for this piece:
http://www.courtesyparts.com/62050e-...8-p-16897.html
He'll make you a better price and tell em I sent ya. You'll need about 6 of them for the entire bumper.

If anything else you can remove your factory mudguards and use the same clip, as it is the same part

As for the undershroud, the hardware kit is optional, if not some washers w/a 10mm bolts will work. I might have a box of bolts in my toolbox, if so, then Ill update w/thread pitch. Hardware store FTW

TJ, what are they qouting you for spraying the fender and bumper?

 

Lowest I've had is 575 just for the spray.

 

Wish I knew how to paint. After completing the AST course @ ATU I enrolled to the Autobody repair, but I had to drop out because of deployment. It sucks because I had spray guns, and a 50 gallon compressor. I ended up giving it it to my older brother in Missouri.

Knowing how to paint cars seems like it would be fun.

 

Lowes has automotive clips and screws. Next to the washers and bolts section.

 

Thanks man! I'll definitely order from him then... I just paid 250 for paint on my lip and bumper. The only downside is my painter is in West Monroe, LA. I'll give you his number if you're interested.

 

So when we gonna have a meet again???

 

CZP had a pretty good shipping. You should have that stuff by the end if the week. I've ordered tons of miscellaneous pieces from them.

250 for a bumper and lip its not bad at all. Hows the color matching? Do you have side skirts too?

When I lived in md. I became friends with a portuguese guy who owned a body shop. He painted and installed my roommates nismo version 2 sides skirts, version 2 wing, rear add ons for 425.

 

Hi everyone, we just found the Little Rock thread on here, we live in Searcy and have a couple of Z's a 300ZX NA and a 350Z Touring. Been going to Branson Z fest for several years now, ImWeeZzel if you saw the shade tents set up with the generator and fans, near the 260Z with the 383 stroker motor that was us, we have learned how to stay cool at Z Fest! Hope to meet some of y'all soon.

 

I visited the tent several times during the show, just cool off for a minute then moved on to finish voting.

 

Hey Steve! figured you were on here! we are just about recuperated! now to rest up for MidwestZ!

 

Still recuping. May be back in school during MWZF not sure yet.

 

When is Midwest Z?

I spoke to some of the Oklahoma Z owners and I forgot the date... I was sooo busy taking pictures, I ended up getting a little sunburn because I didnt want to leave the parking lot lol. I talked to alot of people that day, so I might've met the both of you.

Im down to meet whenever you guys are, but I think we should wait til munnerlyn gets his car back together. No pressure.