haha, somebody else got crappy bulbs in their projectors from Darrin, but they got a fix

https://my350z.com/forum/the-lounge-...in-my-g35.html

 

Could a couple of you guys give me input on this. I've been searching/researching re-flashes and just don't understand it. I'm a complete noob on the subject and was hoping you could help point me in the right direction. I've read about UpRev, Osiris and Technoflash(i think that's the name). What I don't understand is the open loop/closed loop. Dyno tuning with the software compared tothe mail away re-flash. I know this would be a good mod to get to get the most out of my current mods but I am completely lost on the subject. Sorry for the nubbery and thanks for any help!

 

adam.... I found your next wheels.. the new rota grids.

http://img.photobucket.com/albums/v2...8/DSC_5882.jpg

those would look bad *** on your PP Z. yes, in gold.. but black would be bad *** as well

 

anyone have access to a sand/media blasting cabinet?

 

Fawk a reflash! if you take it to the dealer and they reflash it for work being done bada bing there goes your tune.
get a cobb access port or orisis that you can get tunes online or get a utec and drive and get it tuned? No way i would waste my money on a reflash but hey since when does anyone listen to me

 

I would have to see a pic of them on a PPW, im still kinda stuck on some Work wheels

 

No but a sand blaster is cheap, and so is the sand/media I def have a big enough compressor we can just blast the wheels in my back yard you can get a blaster at harbor frieght for cheap, not sure where to get sand at? im sure its not hard to get and cheap as well.

 

I listen to you and your advice! Like I said I don't know a lot about the stuff! Thanks for the advice! I'll look into it more!

And I'm with Tim in the Grids look way good on the Z! And Gold ftw on your car!

 

damn, I got punkd by the weather peeps. I was planning to sleep in.

I know where to buy the blasting media, there's a place on 6th street, by the airport. It's not that cheap.. probably about $30 for a bag big enough for the job. So you really need to capture/reuse it. kinda like powdercoat ovens, not all of them are large enough for a 18" wheel.

 

the look is hot.. but only ballers need apply...

 

harbor frieight sells it also

 

Hmmmmm can you do the hyper black?

 

 

IMO the gold pops out to much? what's yalls thoughts?

 

something to consider, and i dont know why, wheeldude says 06+ needs 3mm spacer up front. its not like those have brembos. He also offers different concaves on the front. So, you'd need to figure out exactly what youre getting when you ordered. a non-concaved front would be massive fail.

 

Mines a 04 but yes i would def check all offsets/and what tires to be ran before purchase.

Im still stuck on the Workz?

 

I can get some sick widths and offsets with the workz

 

Advan is clearancing off a bunch of wheels. The 18" TC2 GTR face is about a thousand off right now!!!

 

Rota is now offering 9/10 as far out as +15.

But, I'd go with the Work Emo's too. aside from no centercap, they are pretty wicked in +20

 

I like the gold a lot on black/white Z's. I line the Work wheels but I'm stuck on the Grids for some reason. I think you couldn't go wrong with either though.