North Carolina useless thread
#142
Registered User
Thread Starter
iTrader: (12)
Join Date: Jun 2008
Location: Fayetteville, NC
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
https://my350z.com/forum/brakes-and-...ing-bumps.html
#143
Registered User
iTrader: (4)
Join Date: Jul 2008
Location: Hickory/MN
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys. Checking in from Hickory. It's pretty quiet out this way *crickets chirping*
Seen a black Z running around here a few times with "stretched" wheels.
If you're ever out this way, let me know... Coronas are on me and they're always cold!
Seen a black Z running around here a few times with "stretched" wheels.
If you're ever out this way, let me know... Coronas are on me and they're always cold!
#146
Registered User
iTrader: (1)
Join Date: Nov 2008
Location: Raleigh, Nc
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
I'm hosting a meet in the middle of the Charlotte Speedway, you guys should come out
here's the info on the event!
https://my350z.com/forum/south-east/...-july-9th.html
here's the info on the event!
https://my350z.com/forum/south-east/...-july-9th.html
#147
Registered User
iTrader: (1)
Join Date: Apr 2011
Location: Cary, NC
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
That's cool about the drifting event in Charlotte, my car should be ready by then and I might be able to make it.
Where have y'all been getting your window tint done in the Raleigh area? Mine needs to be redone soon and it'd be great if someone had a recommendation. Thanks!
Where have y'all been getting your window tint done in the Raleigh area? Mine needs to be redone soon and it'd be great if someone had a recommendation. Thanks!
#148
Registered User
iTrader: (4)
Join Date: Jul 2008
Location: Hickory/MN
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
I'm hosting a meet in the middle of the Charlotte Speedway, you guys should come out
here's the info on the event!
https://my350z.com/forum/south-east/...-july-9th.html
here's the info on the event!
https://my350z.com/forum/south-east/...-july-9th.html
Cool! I might be there.
#149
New Member
iTrader: (6)
Join Date: Jan 2011
Location: Raleigh, NC
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
anyone in the raleigh area willing to help me put on suspension, camber and toe arms. I had a hard time getting the bolts loose using hand tools and left the car sitting on jack stands .
Will pay!!
Will pay!!
#150
Registered User
Thread Starter
iTrader: (12)
Join Date: Jun 2008
Location: Fayetteville, NC
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
Once you break em loose, they come off easily. I know most of the suspension is like 19, 22, and one or two nuts are 24mm.... maybe a 17 also... wrenches are about $10 each from advanced, 4lb hammer is like $15. dont be scared to hold the wrench tight and bang the ish out of it with the hammer. the rich guys may disagree, but thats how I did mine
#151
Living in 350Z
iTrader: (30)
Join Date: May 2009
Location: Spartanburg(SparkleCity), SC
Posts: 4,293
Likes: 0
Received 2 Likes
on
2 Posts
@SenHR Too bad you aren't closer. I still have my air tools, creeper, etc still in the back of the truck and on the hauler from the trip to ZDayz. Hopefully someone nearby can give you a hand. I can't tell you how much it's worth having an air compressor, impact gun, sockets & a creeper if you're going to be doing work on the Z.
#152
Living in 350Z
iTrader: (30)
Join Date: May 2009
Location: Spartanburg(SparkleCity), SC
Posts: 4,293
Likes: 0
Received 2 Likes
on
2 Posts
If they're really stuck:
Cheapest option with a good chance of buggering up your bolts/nuts is mpact's suggestion above to go with the wrench and hammer.
Spend a few dollars more and get some vice grips, wd40, and a breaker bar that fits your sockets for a safer way. You can use a hammer with the breaker bar and you'll have less chance of messing up the bolt/nut.
If you have some cash to spend (you mentioned paying someone) and you'll be continuing to do work for yourself, visit your local pawn shop and pick up a used air compressor and impact gun - just make sure that it works before you buy it.
Cheapest option with a good chance of buggering up your bolts/nuts is mpact's suggestion above to go with the wrench and hammer.
Spend a few dollars more and get some vice grips, wd40, and a breaker bar that fits your sockets for a safer way. You can use a hammer with the breaker bar and you'll have less chance of messing up the bolt/nut.
If you have some cash to spend (you mentioned paying someone) and you'll be continuing to do work for yourself, visit your local pawn shop and pick up a used air compressor and impact gun - just make sure that it works before you buy it.
#153
Registered User
iTrader: (1)
Join Date: Apr 2011
Location: Cary, NC
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Message me if you're interested and we can arrange a time to get ya fixed up.
#154
Registered User
iTrader: (59)
Join Date: Feb 2007
Location: Raleigh, North Carolina
Posts: 8,517
Likes: 0
Received 4 Likes
on
4 Posts
In raleigh as well.
Last edited by SuperBlack350z; 05-23-2011 at 07:06 PM.
#157
New Member
iTrader: (6)
Join Date: Jan 2011
Location: Raleigh, NC
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
alright so SuperBlack hooked me up and installed the coils and everything. Shes lookin good but needs to be raised maybe 1/2 an inch, not sure, in the front. Anyways ill post pics when i get back from movies
Last edited by SenHR; 05-26-2011 at 04:03 PM.