|| d e r a i l //
so i take it that fun was had by all? lol. i finally put on the brembo's this weekend. oh yeah... and was sucks was my pops slid out on his motorcycle... that was no good. shiet.. my sis called me to tell me in the middle of the swap... i had the car on jack stands with no wheels and no brakes on. lol.
so i take it that fun was had by all? lol. i finally put on the brembo's this weekend. oh yeah... and was sucks was my pops slid out on his motorcycle... that was no good. shiet.. my sis called me to tell me in the middle of the swap... i had the car on jack stands with no wheels and no brakes on. lol.
I would have just put the rims on and go.. **** the brakes!
but i had the brakes completely off already. might as well slap the brembo's on.
he's ok... nothing broken. twisted his right ankle pretty good, and scraped off a piece of skin on his right knee. even the bike wasn;t that bad... just need new front fender, new headlight, alignment, and mirror, some scrapes on the exhaust pipes... but nothing on the gas tank or the rear fender. probably have to adjust the right side foot peg since it got bent up a little bit.
he's ok... nothing broken. twisted his right ankle pretty good, and scraped off a piece of skin on his right knee. even the bike wasn;t that bad... just need new front fender, new headlight, alignment, and mirror, some scrapes on the exhaust pipes... but nothing on the gas tank or the rear fender. probably have to adjust the right side foot peg since it got bent up a little bit.
but i had the brakes completely off already. might as well slap the brembo's on.
he's ok... nothing broken. twisted his right ankle pretty good, and scraped off a piece of skin on his right knee. even the bike wasn;t that bad... just need new front fender, new headlight, alignment, and mirror, some scrapes on the exhaust pipes... but nothing on the gas tank or the rear fender. probably have to adjust the right side foot peg since it got bent up a little bit.
he's ok... nothing broken. twisted his right ankle pretty good, and scraped off a piece of skin on his right knee. even the bike wasn;t that bad... just need new front fender, new headlight, alignment, and mirror, some scrapes on the exhaust pipes... but nothing on the gas tank or the rear fender. probably have to adjust the right side foot peg since it got bent up a little bit.
yeah, i was tripping out and tried to get to his house to see what's up. but wasn't too bad after you clean up the bike and him. lol. time to upgrade the headlights and exhaust for the cruiser... lol.
dood... my front wheels alomst didn't fit over the brembo calipers. i only have about 0.5 in of clearance from the face of the calipers to the inside of the sopkes. lol. brakes feel good. plus on sunday i had to take the whole rear assembly off again to adjust the parking brake... one of the small adjuster screws was stuck. and i figure out that nissan factory installed onf of them backwards. so when you loosen, it actually tightened it. so stupid.
dood... my front wheels alomst didn't fit over the brembo calipers. i only have about 0.5 in of clearance from the face of the calipers to the inside of the sopkes. lol. brakes feel good. plus on sunday i had to take the whole rear assembly off again to adjust the parking brake... one of the small adjuster screws was stuck. and i figure out that nissan factory installed onf of them backwards. so when you loosen, it actually tightened it. so stupid.
yeah, i was tripping out and tried to get to his house to see what's up. but wasn't too bad after you clean up the bike and him. lol. time to upgrade the headlights and exhaust for the cruiser... lol.
dood... my front wheels alomst didn't fit over the brembo calipers. i only have about 0.5 in of clearance from the face of the calipers to the inside of the sopkes. lol. brakes feel good. plus on sunday i had to take the whole rear assembly off again to adjust the parking brake... one of the small adjuster screws was stuck. and i figure out that nissan factory installed onf of them backwards. so when you loosen, it actually tightened it. so stupid.
dood... my front wheels alomst didn't fit over the brembo calipers. i only have about 0.5 in of clearance from the face of the calipers to the inside of the sopkes. lol. brakes feel good. plus on sunday i had to take the whole rear assembly off again to adjust the parking brake... one of the small adjuster screws was stuck. and i figure out that nissan factory installed onf of them backwards. so when you loosen, it actually tightened it. so stupid.
you dont see those err day 
^ lol at m6... yeah man those 06 brakes on your car is da bomb! now you can stop your car compared to those 1-pot front brake you had... i have no idea how you can stop the z with those things?
thanks zen.. he should be fine in a few weeks, he just can't walk around too much. gonna wash the car this week and i'll probably throw up some pick. they are the oem brembo's... powdered coated red. Peter@m1 saw them on sunday when i bumped into him at the shop. lol.
thanks zen.. he should be fine in a few weeks, he just can't walk around too much. gonna wash the car this week and i'll probably throw up some pick. they are the oem brembo's... powdered coated red. Peter@m1 saw them on sunday when i bumped into him at the shop. lol.
he's up to 7 posts now from 6 days ago... talk about uber active 
I know... we were in Citrus for awhile... went outside for a breather, then they won't let us in... Damus stage was cool, music sucked and volume was a bit low. But the place is perfect... spots to get floored and to dance without getting bumped into. Over all, it's a great night 
I heard they moved the main stage outdoor in the end???
I heard they moved the main stage outdoor in the end???
fuuck i cant wait til edc!
Yo M6, when you get the chance (soon), post the video of Chelsea first light show! she's asking for it!!!
btw.. the equalizer shirt did work! I went to SD to exchange it... she put some battery in and it worked... werd... I bought those battery brand new at Albertson and used it... who'd thought new batteries don't work
btw.. the equalizer shirt did work! I went to SD to exchange it... she put some battery in and it worked... werd... I bought those battery brand new at Albertson and used it... who'd thought new batteries don't work
http://www.youtube.com/watch?v=NNL3Jr5genM
